025-0767-001 ITT Cannon, 025-0767-001 Datasheet - Page 105

• Manufacturer Part Number: 025-0767-001
• Description: RP CONDUCTIVE D/C 34 SHELL
• Manufacturer: ITT Cannon

Specifications of 025-0767-001

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: I025-0767-001

Performance and Material Specifications
www.ittcannon.com
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
DPD - Standard Rack and Panel Connector
Series
DPD connectors are the original rectangular rack
and panel connectors with solder type contact
termination, accommodating a wide range of con-
tact arrangements and a variety of endbells and
junction shells.
DPDMA - LITTLE CAESAR® Contact Assembly
DPDMA connectors are DPD's with the LITTLE
CAESAR contact assembly for rear insertion, re-
lease and extraction of crimp type contacts. Con-
tacts are inserted by hand, and extraction is ac-
compfished with the use of an expendable plastic
MATERIALS AND FINISHES
VOLTAGE/CURRENT DATA
Insert Voltages/Test Results
Laboratory Conditions
Ambient Temperature
Relative Humidy
Barometric Pressure
*Size 20 contacts have gold plate finish. All other sizes have silver plate finish. Tin alloy may be substituted for silver.
There was no evidence of breakdown when the test
voltages given were applied, for a period of one
minute, between the contacts and between the
shell and the contacts with spacings as noted.
Shell/Polarization Hardware
Insulator
Contacts
•Rectangular Rack/Panel Connectors
•Non-Environemental Single and Two-Gang
Configurations
DPD-33/DPDMA-33
Plug
23˚C to 27˚C (73˚F to 80.6˚F)
69% to 73%
29.70 (754.38) to 29.75 (755.65)
Material
Finish
Material
Material
Finish
Termination
DPD-34/DPDMA-34
Receptacle
DPD/DPD2
Aluminum alloy
Natural cadmium plate
Melamine or fabricated phenolic
Copper alloy
Silver or gold plate*
Solder pot
Cannon's DPD Rack and Panel connectors are dis-
tinguished from other connector lines by their
rectanguiar shape which provides maximum space
utilization an rack or chassis mounted equipment.
The DPD is used in any commercial application
where moisture/ environmental resistance is not
required, such as I/0 connector or computer pan-
els, GFE test equipment, and GSE ground support
equipment. For example, one-half of a connector
assembly is mounted on a radio rack, or panel, and
the mating connector is attached to a cable that
tool. Hard dielectric, closed-entry socket inserts
have lead-in chamfers for positive mating of pin
contacts during engagement. Both the DPD and
DPDMA
DPD2 - Two Gang Version of DPD
DPD2 connectors are two-gang versions of the DPD
solder type connectors designed to handle double
the circuitry in instrument panel disconnect applica-
tions. The DPD2 is identical in shell style and
materials to the DPD, but features a center coupling
screw for positive engagement. Various coupling
devices are shown on pages 114-115. The DPD2
may also be ordered without the engaging device by
Current Carrying Capacity of Wire and Cables
Wire Size
Amperage
105
connectors
100
#4
#6
80
#8
60
DPD2-33/DPD2MA-33
are
#10
35
Plug
intermateable.
#14
25
#16
20
DPDMA/DPD2MA
Aluminum alloy
Natural cadmium plate
Diallyl phthalate
Copper alloy
Silver or gold plate*
Crimp
#20
7.5
connects to another instrument or rack. The DPO
has a temperature range of -55˚C to +125˚C
(-67˚F to +257˚F).
In addition to standard DPD connectors with solder
contacts, the DPDMA version has rear insertion, rear
release crimp, snap-in contacts that feature the LITTLE
CAESAR®, rear. release contact retention assembly
used in many other ITT product lines.
omitting the letter code "M" as shown in the
ordering nomenclature. Two optional polarizing
posts give up to six alternate insert positions (page
112).
DPD2MA - LITTLE CAESAR® Contact Assembly
DPD2MA connectors are DPD2 connectors with the
LITTLE CAESAR contact assembly for rear insertion,
release and extraction of crimp type contacts.
Contact insertion is by hand and extraction is by an
expendable plastic tool. Hard dielectric, closed-
entry socket inserts have lead-in chamfers for
positive mating of pin contacts during engagement.
DPD2 and DPD2MA connectors are intermateable.
11/64 (4.37)
Clearance
1/64 (0,40)
1/32 (0.79)
1/16 (0.59)
5/64 (1.98)
3/32 (2.38)
7/64 (2.78)
9/64 (3.57)
5/32 (3.97)
3/64(1.19)
1/8 (3.18)
Contact
60 cps (ac rms)
Test Voltage
DPD/DPDMA
1000 Volts
1300 Volts
1700 Volts
2050 Volts
2350 Volts
2600 Volts
2900 Volts
3050 Volts
3250 Volts
3450 Volts
540 Volts
DPD2-34/DPD2MA-34
DPD/DPDMA Specifications
QQ-A-591/A380
QQ-P-416
MIL-M-14
QQ-C-533
QQ-C-365 MIL-G-45204
N/A
Receptacle
13/32 110.32)
13/64 (5.16)
15/64 (5.95)
19/64 (7.54)
25/64 (9.92)
7/16 (11.11)
3/16 (4.76)
7/32 (5.56)
5/16 (7.94)
1/2 (12.70)
Clearance
1/4 (6.35)
3/8 (9.52)
Contact
60 cps (ac rms)
Test Voltage
3650 Volts
3850 Volts
4050 Volts
4240 Volts
4420 Volts
4940 Volts
5100 Volts
5750 Volts
5890 Volts
6020 Volts
6300 Volts
6800 Volts