SST89V58RD2-33-C-NJE Microchip Technology, SST89V58RD2-33-C-NJE Datasheet - Page 8

• Manufacturer Part Number: SST89V58RD2-33-C-NJE
• Description: IC MCU 8BIT 40KB FLASH 44PLCC
• Manufacturer: Microchip Technology
• Series: FlashFlex®r

Specifications of SST89V58RD2-33-C-NJE

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 44-LCC (J-Lead)
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 36
• Eeprom Size: 8K x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: SST89xxxRD
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI, UART
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Data Sheet
2.1 Pin Descriptions
TABLE
©2007 Silicon Storage Technology, Inc.
Symbol
P0[7:0]
P1[7:0]
P2[7:0]
P3[7:0]
P1[0]
P1[1]
P1[2]
P1[3]
P1[4]
P1[5]
P1[6]
P1[7]
P3[0]
P3[1]
2-1: Pin Descriptions (1 of 2)
I/O with internal
I/O with internal
I/O with internal
pull-ups
pull-up
pull-up
Type
I/O
I/O
I/O
I/O
I/O
I/O
I/O
O
I
I
I
1
Name and Functions
Port 0: Port 0 is an 8-bit open drain bi-directional I/O port. As an output port each pin can
sink several LS TTL inputs. Port 0 pins float that have ‘1’s written to them, and in this state
can be used as high-impedance inputs. In this application, it uses strong internal pull-ups
when transitioning to V
programming, and outputs the code bytes during the external host mode verification. Exter-
nal pull-ups are required during program verification.
Port 1: Port 1 is an 8-bit bi-directional I/O port with internal pull-ups. The Port 1 output buff-
ers can drive LS TTL inputs. Port 1 pins are pulled high by the internal pull-ups when “1”s
are written to them and can be used as inputs in this state. As inputs, Port 1 pins that are
externally pulled low will source current because of the internal pull-ups. P1[5, 6, 7] have
high current drive of 16 mA. Port 1 also receives the low-order address bytes during the
external host mode programming and verification.
T2: External count input to Timer/Counter 2 or Clock-out from Timer/Counter 2
T2EX: Timer/Counter 2 capture/reload trigger and direction control
ECI: PCA Timer/Counter External Input:
This signal is the external clock input for the PCA timer/counter.
CEX0: Compare/Capture Module External I/O
Each compare/capture module connects to a Port 1 pin for external I/O. When not used by
the PCA, this pin can handle standard I/O.
SS#: Master Input or Slave Output for SPI.
OR
CEX1: Compare/Capture Module External I/O
MOSI: Master Output line, Slave Input line for SPI
OR
CEX2: Compare/Capture Module External I/O
MISO: Master Input line, Slave Output line for SPI
OR
CEX3: Compare/Capture Module External I/O
SCK: Master clock output, slave clock input line for SPI
OR
CEX4: Compare/Capture Module External I/O
Port 2: Port 2 is an 8-bit bi-directional I/O port with internal pull-ups. Port 2 pins are pulled
high by the internal pull-ups when “1”s are written to them and can be used as inputs in this
state. As inputs, Port 2 pins that are externally pulled low will source current because of the
internal pull-ups. Port 2 sends the high-order address byte during fetches from external Pro-
gram memory and during accesses to external Data Memory that use 16-bit address
(MOVX@DPTR). In this application, it uses strong internal pull-ups when transitioning to
V
nal host mode programming and verification.
Port 3: Port 3 is an 8-bit bidirectional I/O port with internal pull-ups. The Port 3 output buff-
ers can drive LS TTL inputs. Port 3 pins are pulled high by the internal pull-ups when “1”s
are written to them and can be used as inputs in this state. As inputs, Port 3 pins that are
externally pulled low will source current because of the internal pull-ups. Port 3 also
receives some control signals and high-order address bits during the external host mode
programming and verification.
RXD: Universal Asynchronous Receiver/Transmitter (UART) - Receive input
TXD: UART - Transmit output
OH
. Port 2 also receives some control signals and high-order address bits during the exter-
OH.
Port 0 also receives the code bytes during the external host mode
8
SST89V54RD2/RD / SST89V58RD2/RD
FlashFlex MCU
S71255-10-000
12/07