AFBR-57R6AEZ Avago Technologies US Inc., AFBR-57R6AEZ Datasheet - Page 9

• Manufacturer Part Number: AFBR-57R6AEZ
• Description: Fiber Optic Transmitters, Receivers, Transceivers Transceiver
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of AFBR-57R6AEZ

• Product: Transceiver
• Data Rate: 4.25 GBd, 2.125 GBd, 1.0625 GBd, 1.25 GBd
• Wavelength: 860 nm (Max)
• Maximum Rise Time: 0.09 ns/0.15 ns
• Maximum Fall Time: 0.09 ns/0.15 ns
• Pulse Width Distortion: 0.06 ns (Max)/0.062 ns (Max)
• Maximum Output Current: 300 mA
• Operating Supply Voltage: 2.97 V to 3.63 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 10 C
• Package / Case: SFP
• Mounting Type: SFP
• Voltage - Supply: 2.97 V ~ 3.63 V
• Connector Type: LC Duplex
• Applications: Ethernet
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Multimode Fiber
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

9
Table 6. Transmitter and Receiver Electrical Characteristics
(T
Parameter
High Speed Data Input:
High Speed Data Output:
Receiver Contributed Total Jitter
Receiver Contributed Total Jitter
Receiver Contributed Total Jitter
Receiver Contributed Total Jitter
Receiver Electrical Output Rise & Fall Times
Notes:
1. Internally AC coupled and terminated (100 Ohm differential).
2. Internally AC coupled but requires an external load termination (100 Ohm differential).
3. Contributed DJ is measured on an oscilloscope in average mode with 50% threshold and K28.5 pattern. Contributed TJ is the sum of contributed
4. 20%-80% electrical rise & fall times measured with a 500 MHz signal utilizing a 1010 data pattern.
C
Transmitter Differential Input Voltage (TD +/-)
Receiver Differential Output Voltage (RD +/-)
(4.25 Gb/s)
(2.125 Gb/s)
(1.0625 Gb/s)
(1.25 Gb/s)
(20-80%)
RJ and contributed DJ. Contributed RJ is calculated for 1x10
the oscilloscope by 14. Per FC-PI (Table 13 - MM jitter output, note 1), the actual contributed RJ is allowed to increase above its limit if the actual
contributed DJ decreases below its limits, as long as the component output DJ and TJ remain within their specified FC-PI maximum limits with
the worst case specified component jitter input.
= -10°C to 85°C, VccT, VccR = 3.3 V ± 10%)
Symbol
V
Vo
TJ
TJ
TJ
TJ
tr, tf
-12
I
BER by multiplying the RMS jitter (measured on a single rise or fall edge) from
Minimum
400
600
50
Typical
Maximum
2400
1600
0.26
62
0.26
124
0.22
205
0.332
266
150
Unit
mV
mV
UI
ps
UI
ps
UI
ps
UI
ps
ps
Notes
Note 1
Note 2
Note 3
Note 3
Note 3
Note 3
Note 4