SI3050-E-FT Silicon Laboratories Inc, SI3050-E-FT Datasheet - Page 79

• Manufacturer Part Number: SI3050-E-FT
• Description: IC VOICE DAA GCI/PCM/SPI 20TSSOP
• Manufacturer: Silicon Laboratories Inc

Specifications of SI3050-E-FT

• Package / Case: 20-TSSOP (0.173", 4.40mm Width)
• Includes: Line Voltage Monitor, Loop Current Monitor, Overload Detection, Parallel Handset Detection, Polarity Reversal Detection, TIP and
• Function: Data Access Arrangement (DAA)
• Interface: PCM, Serial, SPI
• Number Of Circuits: 1
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 8.5mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Product: RF / Wireless
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3.3 V
• Supply Current: 8.5 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Register 26. DC Termination Control
Reset settings = 0000_0000
Bit
7:6
5:4
3:2
1
0
Name
Type
Bit
Reserved
DCV[1:0]
MINI[1:0]
Name
DCR
ILIM
D7
TIP/RING Voltage Adjust.
These bits adjust the voltage on the DCT pin of the line-side device, which affects the TIP/
RING voltage on the line. Low-voltage countries should use a lower TIP/RING voltage. Rais-
ing the TIP/RING voltage can improve signal headroom.
Minimum Operational Loop Current.
Adjusts the minimum loop current at which the DAA can operate. Increasing the minimum
operational loop current can improve signal headroom at a lower TIP/RING voltage.
Current Limiting Enable.
0 = Current limiting mode disabled.
1 = Current limiting mode enabled. This mode limits loop current to a maximum of 60 mA per
the TBR21 standard.
DC Impedance Selection.
0 = 50  dc termination is selected. This mode should be used for all standard applications.
1 = 800  dc termination is selected.
These bits must always be written to 0.
DCV[1:0]
MINI[1:0]
DCV[1:0]
R/W
00
01
10
11
00
01
10
11
D6
DCT Pin Voltage
Min Loop Current
3.1 V
3.2 V
3.35 V
3.5 V
10 mA
12 mA
14 mA
16 mA
D5
MINI[1:0]
R/W
Rev. 1.31
D4
Function
D3
0
Si3050 + Si3018/19
D2
0
ILIM
R/W
D1
DCR
R/W
D0
79