MORPH-IC-II FTDI, Future Technology Devices International Ltd, MORPH-IC-II Datasheet - Page 5

• Manufacturer Part Number: MORPH-IC-II
• Description: MODULE USB TO FPGA
• Manufacturer: FTDI, Future Technology Devices International Ltd
• Type: FPGAr

Specifications of MORPH-IC-II

• Contents: Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: -
• Other names: 768-1097

2
Morph-IC-II has the following features
2.1 Driver Support
Morph-IC-II uses the FTDI Ft2232H USB bridge chip. This chip requires USB drivers which can be
downloaded free of charge from http://www.ftdichip.com/FTDrivers.htm.
Royalty free VIRTUAL COM PORT
(VCP) DRIVERS for...
The utilities included Morph-IC-II package can run on Windows 2000, ME, XP, Vista and 7.
The recommend design utility for Morph-IC-II is Quartus-II. This free software can be downloaded from
the Altera website: http://www.altera.com.
26 Embedded Logic RAM Elements (119Kbits)
FT2232HQ Dual, Hi-Speed USB UART/FIFO IC
used for USB communications
Altera Cyclone 2 - EP2C5F256C8N FPGA
capable of synthesizing large scale integrated
circuits
Ultra fast FPGA configuration/reconfiguration
over USB (under 0.1 sec)
4,608 Embedded FPGA Logic Elements (about
80,000 Gates typically)
FPGA-PC USB Data Transfer at up to 40M
Byte/sec
Onboard 93LC56B configuration EEPROM
MOSFET switched 5V and 3.3V power outputs
for powering external logic
Onboard 12MHz crystal and essential support
components for FT2232HQ
80 dedicated external I/O pins
Onboard 50MHz oscillator as FPGA primary
clock – also available for external use.
JTAG interface for testing the I/Os and
registers of the FPGA
1 dedicated external clock input
Windows 2000, Server 2003, XP Server 2008
Windows XP and XP 64-bit
Windows Vista and Vista 64-bit
Windows 7
Windows XP Embedded
Windows CE 4.2, 5.0, 5.2 and 6.0
Mac OS-X
Linux (2.6.9 or later)
Features
Copyright © 2010 Future Technology Devices International Limited
`
:
Royalty free D2XX Direct Drivers
(USB Drivers + DLL S/W Interface)
Powered from USB bus or external PSU
Standard 0.1 inch pitch format connector pins,
ideal for rapid prototyping or small-medium
size production runs
FTDI's VCP and D2XX USB Windows and Linux
USB drivers (provided) eliminate the need for
driver development in most cases
FPGA loader interface DLL (for Windows only
not including CE) supplied including interface
examples in VB, VC++ and Delphi
Stand-alone FPGA loader programs provided for
Windows and Linux
VHDL programming examples (I/O over USB)
provided
Delphi application software examples including
source code provided
Free Altera Quartus II Software Starter Suite
development software available from the Altera
Website
Backward compatible with the existing
MorphIC-I
Supports 1.5/1.8/2.5/3.3-V LVTTL/LVCMOS
signals, IOBANK1-3 restricted to 3.3V.
Windows 2000, Server 2003, Server 2008
Windows XP and XP 64-bit
Windows Vista and Vista 64-bit
Windows 7
Windows XP Embedded
Windows CE 4.2, 5.0, 5.2 and 6.0
Linux (2.4 or later) and Linux x86_64
Document Reference No.: FT_000198
Clearance No.: FTDI#
MORPH-IC-II Datasheet
Version 1.04
4
164