LAN9218-MT SMSC, LAN9218-MT Datasheet - Page 107

• Manufacturer Part Number: LAN9218-MT
• Description: CONTROLLER, ENET, 10/100, 100TQFP
• Manufacturer: SMSC

Specifications of LAN9218-MT

• Data Rate: 100Mbps
• No. Of Ports: 2
• Ethernet Type: IEEE 802.3 / 802.3u
• Supply Current: 40mA
• Supply Voltage Range: 2.97V To 3.63V
• Operating Temperature Range: 0°C To +70°C
• Digital Ic Case Style: TQFP
• Interface Type: HBI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX
Datasheet
SMSC
5.5.1
BITS
6-0
15
14
13
12
10
11
9
8
7
LAN9218
Reset. 1 = software reset. Bit is self-clearing. For best results, when setting
this bit do not set other bits in this register.
Loopback. 1 = loopback mode, 0 = normal operation
Speed Select. 1 = 100Mbps, 0 = 10Mbps. Ignored if Auto Negotiation is
enabled (0.12 = 1).
Auto-Negotiation Enable. 1 = enable auto-negotiate process (overrides
0.13 and 0.8) 0 = disable auto-negotiate process.
Power Down. 1 = General power down-mode, 0 = normal operation.
Note:
Reserved
Restart Auto-Negotiate. 1 = restart auto-negotiate process 0 = normal
operation. Bit is self-clearing.
Duplex Mode. 1 = full duplex, 0 = half duplex. Ignored if Auto Negotiation
is enabled (0.12 = 1).
Collision Test. 1 = enable COL test, 0 = disable COL test
Reserved
Basic Control Register
Note 5.1
Index (In Decimal):
After this bit is cleared, the PHY may auto-negotiate with it's
partner station. This process may take a few seconds to complete.
Once auto-negotiation is complete, bit 5 of the PHY's Basic Status
Register will be set.
The default value of this bit is determined by Pin 74 "SPEED_SEL". Please refer to the
pin description section for more details
DESCRIPTION
0
DATASHEET
107
Size:
16-bits
RW/SC
RW/SC
TYPE
RW
RW
RW
RW
RW
RW
RO
RO
Revision 1.93 (11-27-07)
See
See
DEFAULT
Note 5.1
Note 5.1
0
0
0
0
0
0
0
0