2SC0108T2A0-17 CT CONCEPT, 2SC0108T2A0-17 Datasheet - Page 4

• Manufacturer Part Number: 2SC0108T2A0-17
• Description: IC, IGBT DRIVER, 1700V, 8A, PCB
• Manufacturer: CT CONCEPT

Specifications of 2SC0108T2A0-17

• Device Type: IGBT
• Module Configuration: Dual
• Peak Output Current: 8A
• Output Resistance: 0.5ohm
• Input Delay: 90ns
• Output Delay: 75ns
• Supply Voltage Range: 14.5V To 15.5V
• Driver Case Style: PCB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2SC0108T2Ax-17
Preliminary Data Sheet
Creepage distance
Clearance distance
Outputs
Blocking capacitance
Typical internal gate resistance
Output voltage swing
The output voltage swing consists of two distinct segments. First, there is the turn-on voltage V
pins GHx and VEx. V
frequencies.
The second segment of the output voltage swing is the turn-off voltage V
GLx and VEx. It is a negative voltage. It changes with the output power to accommodate the inevitable
voltage drop across the internal DC/DC converter.
Output Voltage
Turn-on voltage, V
Turn-off voltage, V
Turn-off voltage, V
Footnotes to the Key Data
1 )
2 )
3 )
4 )
5 )
6 )
7 )
8 )
Page 4
The maximum peak gate current refers to the highest current level occurring during the product
lifetime. It is an absolute value and does also apply for short pulses.
The average supply input current is limited for thermal reasons. Higher values than specified by the
absolute maximum rating are permissible (e.g. during power supply start up) if the average remains
below the given value, provided the average is taken over a time period which is shorter than the
thermal time constants of the driver in the application.
There is no means of actively controlling or limiting the input current in the driver. In the case of
start-up with very high blocking capacitor values, or in case of short circuit at the output, the supply
input current has to be limited externally.
The maximum output power must not be exceeded at any time during operation. The absolute
maximum rating must also be observed for time periods shorter than the thermal time constants of
the driver in the application.
An extended output power range is specified in the output power section for maximum ambient
temperatures of 70°C. In that case, the absolute maximum rating for the operating temperature
changes to (–40°C - 70°C) and the absolute maximum output power rating changes to 1W.
The delay time is measured between 50% of the input signal and 10% voltage swing of the
corresponding output. The delay time is independent of the output loading.
Output rise and fall times are measured between 10% and 90% of the nominal output swing. The
values are given for the driver side of the gate resistors without load. The time constant of the
output load in conjunction with the present gate resistors leads to an additional delay at the load side
of the gate resistors.
The values given refer to the total gate resistance, including external resistors and the internal
GHx
GLx
GLx
GHx
is regulated and maintained at a constant level for all output power values and
Secondary to secondary side
Primary to secondary side
Secondary to secondary side
Remarks
VISOx to VEx
VEx to COMx
Turn-on and turn-off (Note 16)
Remarks
Any load condition
No load
1W output power
GLx
INTELLIGENT POWER ELECTRONICS
. V
GLx
12.9
Min
Min
8.5
6.5
is measured between pins
15.0
Typ
Typ
-9.4
-7.6
9.4
9.4
0.5
Max
GHx
Max
between
Unit
Unit
mm
mm
mm
µF
µF
Ω
V
V
V