APDS-9005-020 Avago Technologies US Inc., APDS-9005-020 Datasheet - Page 10

• Manufacturer Part Number: APDS-9005-020
• Description: AMBIENT LIGHT SENSOR 6CHIPLED
• Manufacturer: Avago Technologies US Inc.
• Type: Ambient Light Photo Sensorr

Specifications of APDS-9005-020

• Package / Case: Chip LED-6
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Product: Ambient Light Sensor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 516-1717-2

Appendix A: SMT Assembly Application Note
1.0 Solder Pad, Mask and Metal Stencil Aperture
Solder
Figure A1. Stencil and PCBA
0
1.1 Recommended Land Pattern
Figure A2. Recommended Land Pattern
Mask
Aperture
Stencil
0.45
0.2
C L
0.4
0.3
0.4
Metal Stencil For
Solder Paste
Printing
Land
Pattern
PCBA
0.9
0.4
1.2 Recommended Metal Solder Stencil Aperture
It is recommended that a 0.11 mm (0.004 inches) thick
stencil be used for solder paste printing. Aperture
opening for shield pad is 0.4mm x 0.4mm and 0.2mm x
0.4mm (as per land pattern). This is to ensure adequate
printed solder paste volume and no shorting.
Figure A3. Solder Stencil Aperture
1.3 Adjacent Land Keepout and Solder Mask Areas
Adjacent land keep-out is the maximum space occupied
by the unit relative to the land pattern. There should be
no other SMD components within this area.
The minimum solder resist strip width required to avoid
solder bridging adjacent pads is 0.2 mm.
Note: Wet/Liquid Photo-Imageable solder resist/mask is recommended.
Figure A4 Adjacent Land Keepout and Solder Mask Areas
Mounting
Unit: mm
1.7
Center
Aperture
Opening
2.6
0.2 MIN.
1.6
2.7
Unit: mm
0.11