SI-HG80DQD BANNER ENGINEERING, SI-HG80DQD Datasheet - Page 5

• Manufacturer Part Number: SI-HG80DQD
• Description: SWITCH, SAFETY INTERLOCK, 1NO/1NC, 3A
• Manufacturer: BANNER ENGINEERING
• Type: Interlockr

Specifications of SI-HG80DQD

• Contact Configuration: SPDT
• Contact Voltage Ac Max: 250V
• Contact Voltage Dc Max: 60V
• Contact Current Ac Max: 3A
• Contact Current Dc Max: 500mA
• Switch Operation: ON-OFF
• Actuator Type: Flexible
• Current, Rating: 3/0.5 AAC/ADC
• Function: Safety
• Ip Rating: IP67
• Number Of Poles: 1
• Number Of Positions: 2
• Termination: Quick Connect
• Voltage, Rating: 250/60 VAC/VDC

Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: [phone]
Safety switches should be checked at each shift change or machine setup by a
designated person (see below) for:
1. Breakage of the switch body.
2.
3.
(or any opening) before hazardous machine motion has completely stopped
4. Verification that the hinge swings freely throughout its total operating range.
5. Loosening of mounting hardware.
6. Signs of deterioration or damage.
7. Signs of tampering or defeat to the switch or to the wiring interface to the machine.
A designated person is identified in writing by the employer as being appropriately trained
to perform a specified checkout procedure.
Do not attempt any repairs to the switch. It contains no field-replaceable
components. Return the switch to the factory for warranty repair or replacement.
If it ever becomes necessary to return a switch to the factory, please do the following:
1. Contact the Banner applications engineering department at the number or address
2. Pack the switch carefully. Damage which occurs in shipping is not covered by warranty.
Confirmation that the safety switch is not being used as an end stop
Verification that it is not possible to reach any hazard point through an opened guard
listed on the back cover. They will attempt to troubleshoot the system from your
description of the problem. If they conclude that a component is defective, they will
issue an RMA (Return Merchandise Authorization) number for your paperwork, and
give you the proper shipping address.
Hinge Switches –
Periodic Checks
Repairs
SI-HG80 Series
.
P/N 46735 rev. B
.
5