01230.9-01 STEGO, 01230.9-01 Datasheet - Page 25

• Manufacturer Part Number: 01230.9-01
• Description: Humidity And Temperature Control
• Manufacturer: STEGO

Specifications of 01230.9-01

• Mounting Type: DIN Rail
• Operating Voltage Max: 120V
• Operating Temperature Max: 60°C
• Output Type: Temperature
• Supply Voltage: 120VAC
• Temperature Accuracy ±: 1K
• Humidity Range: 50 To 90% RH
• Operating Temperature Min: 0°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.
04640.0-00
04641.0-00
04640.9-00
04641.9-00
04640.1-00
04640.2-00
04641.2-00
Part No.
e.g. KT 011 Thermostat
Pilot contact
STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]
Heating capacity
(120VAC or 230VAC)
Fan Heater HGL 046
250W
400W
250W
400W
250W
250W
400W
3.35” (85 mm)
Heater
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
Operating voltage
The compact HGL 046 fan heater prevents formation of condensation. The integrated high per-
formance axial fan provides forced air circulation and so guarantees an even temperature in
enclosures. The heater is wired using the internal terminal connectors.
| |
230VAC, 50/60Hz
230VAC, 50/60Hz
120VAC, 50/60Hz
120VAC, 50/60Hz
Technical Data
Compact size
Built-in overheat protection
Long service life
DIN rail mountable
Heating element
Overheat protection
Heater body
Surface temperature
Axial fan, ball bearing
Air flow, free blowing
Connection
Connection housing
Mounting
Mounting position
Operating / Storage temperature
Protection class
Protection type
Note: In the case of 24VDC and 48VDC, the fan heater must be switched via a relay. For this application,
the SM 010 Electronic Relay (Part No. 01000.0-00 or 01001.0-00) is recommended.
24VDC
48VDC
48VDC
Fan Heater HGL 046
(24VDC or 48VDC)
HGL 046 Fan Heater 250 & 400W
7.2” (182mm)
8.7” (222mm)
7.2” (182mm)
8.7” (222mm)
7.2” (182mm)
7.2” (182mm)
8.7” (222mm)
Length (L)
Heater
resistance - micanite
built-in temperature limiter
extruded aluminum, anodized
400W heater - max. 167°F (75°C)
service life 50,000h at 77°F (25°C)
AC: 26 cfm (45m³/h) - 50Hz; 32 cfm (54m³/h) - 60Hz
DC: 32 cfm (54m³/h)
3-pole terminal AWG 16 max. (1.5mm²) with strain relief,
clamping torque 0.8Nm max.
plastic, UL 94V-0, black
clip for 35mm DIN rail, EN 60 715
vertical
-49 to +158°F (-45 to +70°C)
I (grounded)
IP20
Electronic
Weight (approx.)
SM 010
relay
2.4 lbs. (1.1kg)
3.1 lbs. (1.4kg)
2.4 lbs. (1.1kg)
3.1 lbs. (1.4kg)
2.4 lbs. (1.1kg)
2.4 lbs. (1.1kg)
3.1 lbs. (1.4kg)
e.g. KT 011 Thermostat
Pilot contact
UL File No. E150057, VDE
UL File No. E150057, VDE
UL File No. E150057, VDE
UL File No. E150057, VDE
Approvals
-
-
-