01230.9-01 STEGO, 01230.9-01 Datasheet - Page 5

• Manufacturer Part Number: 01230.9-01
• Description: Humidity And Temperature Control
• Manufacturer: STEGO

Specifications of 01230.9-01

• Mounting Type: DIN Rail
• Operating Voltage Max: 120V
• Operating Temperature Max: 60°C
• Output Type: Temperature
• Supply Voltage: 120VAC
• Temperature Accuracy ±: 1K
• Humidity Range: 50 To 90% RH
• Operating Temperature Min: 0°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.
01230.0-00
01230.9-00
01230.9-01
Part No.
STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]
Operating voltage
230VAC, 50/60Hz
120VAC, 50/60Hz
120VAC, 50/60Hz
1.97” (50 mm)
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
| |
The ETF 012 senses the ambient temperature and relative air humidity. Depending on which
contact combination is chosen, it then turns on or off a connected device if either the tempera-
ture is below, or the humidity above the set point. The integrated LED in each adjustment knob
is lit when indicating the active function.
Setting range - temperature
Technical Data
Switching difference - temperature
Switching difference - humidity
Response time - humidity
Contact type
Contact resistance
Service life
Max. switching capacity
EMC
Connection
Housing
Mounting
Mounting position
Operating temperature
Storage temperature
Dimensions
Weight
Protection type
Efficient temperature & humidity control
Wide adjustment ranges
High switching capacity
Optical function displays (LED)
DIN rail mountable
32 to 140°F
0 to 60°C
0 to 60°C
ETF 012 Hygrotherm
ETF 012 Electronic Hygrotherm
Setting range - humidity
Wiring example
3.6°F (2K) ± 1K tolerance - at 77°F (25°C) and 50% RH
4% RH ± 1% tolerance - at 77°F (25°C) and 50% RH
approx. 5 sec.
SPDT / change-over contact (relay)
< 10m
NC: > 50,000 cycles
NO: > 100,000 cycles
NC: 6A resistive / 1A inductive @ 120VAC
NO: 8A resistive / 1.6A inductive @ 120VAC
NC: 6A resistive / 1A inductive @ 240VAC
NO: 8A resistive / 1.6A inductive @ 240 VAC
4A @ 24VDC
acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
5-pole terminal, clamping torque 0.5Nm max.:
solid wire - AWG 14 max. (2.5mm²)
stranded wire (with wire end ferrule) - AWG 16 max. (1.5mm²)
plastic, UL 94V-0, light grey
clip for 35mm DIN rail, EN 60 715
vertical
+32 to +140°F (0 to +60°C)
-4 to +176°F (-20 to +80°C)
3.0 x 2.4 x 1.7” (77 x 60 x 43mm)
approx. 7 oz. (200g)
IP20
50 to 90% RH
50 to 90% RH
50 to 90% RH
˜
Heater
N
UL File No. E164102, VDE
UL File No. E164102
UL File No. E164102
Approvals