AFCT-57J5ATPZ Avago Technologies US Inc., AFCT-57J5ATPZ Datasheet - Page 2

• Manufacturer Part Number: AFCT-57J5ATPZ
• Description: SM BTS DFB SFP Ind-Temp, RoHS
• Manufacturer: Avago Technologies US Inc.

Specifications of AFCT-57J5ATPZ

• Data Rate: 3.072Gbps
• Wavelength: 1310nm
• Applications: General Purpose
• Voltage - Supply: 2.97 V ~ 3.63 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Installation
The AFCT-57J5ATPZ can be installed in any SFF-8074i
compliant Small Form Pluggable (SFP) port regardless of
host equipment operating status. The AFCT-57J5ATPZ is
hot-pluggable, allowing the module to be installed while
the host system is operating and on-line. Upon insertion,
the transceiver housing makes initial contact with the
host board SFP cage, mitigating potential damage due
to Electro-Static Discharge (ESD).
Digital Diagnostic Interface and Serial Identification
The 2-wire serial interface is based on ATMEL AT24C01A
series EEPROM protocol and signaling detail. Convention-
al SFP EEPROM memory, bytes 0-255 at memory address
0xA0, is organized in compliance with SFF-8074i. New
digital diagnostic information, bytes 0-255 at memory
address 0xA2, is compliant to SFF-8472. The new diag-
nostic information provides the opportunity for Predic-
tive Failure Identification, Compliance Prediction, Fault
Isolation and Component Monitoring.
Predictive Failure Identification
The AFCT-57J5ATPZ predictive failure feature allows a
host to identify potential link problems before system
performance is impacted. Prior identification of link
problems enables a host to service an application via
“fail over” to a redundant link or replace a suspect device,
main taining system uptime in the process. For applica-
tions where ultra-high system uptime is required, a digital
SFP provides a means to monitor two real-time laser
metrics associated with observing laser degradation and
predicting failure: average laser bias current (Tx_Bias) and
average laser optical power (Tx_Power).
2
Compliance Prediction
Compliance prediction is the ability to determine if an
optical transceiver is operating within its operating and
environmental requirements. AFCT-57J5ATPZ devices
provide real-time access to transceiver internal supply
voltage and temperature, allowing a host to identify
potential component compliance issues. Received
optical power is also available to assess compliance of
a cable plant and remote transmitter. When operating
out of requirements, the link cannot guarantee error free
transmission.
Fault Isolation
The fault isolation feature allows a host to quickly
pinpoint the location of a link failure, minimizing
downtime. For optical links, the ability to identify a fault
at a local device, remote device or cable plant is crucial to
speeding service of an installation. AFCT-57J5ATPZ real-
time monitors of Tx_Bias, Tx_Power, Vcc, Temperature and
Rx_Power can be used to assess local transceiver current
operating conditions. In addition, status flags Tx_Disable
and Rx Loss of Signal (LOS) are mirrored in memory and
available via the two-wire serial interface.
Component Monitoring
Component evaluation is a more casual use of the
AFCT-57J5ATPZ real-time monitors of Tx_Bias, Tx_Power,
Vcc, Temperature and Rx_Power. Potential uses are as
debugging aids for system installation and design, and
transceiver parametric evaluation for factory or field
qualification. For example, temperature per module can
be observed in high density applications to facilitate
thermal evaluation of blades, PCI cards and systems.