CRT1-ID16SL Omron, CRT1-ID16SL Datasheet - Page 338

• Manufacturer Part Number: CRT1-ID16SL
• Description: 16 In NPN Cage Clamp
• Manufacturer: Omron

Specifications of CRT1-ID16SL

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Summary of the Analog Input Slave Units
Output Data
Analog Data Selection
Method
Setting Using the CX-
Integrator
Allocating I/O Data
314
1,2,3...
The data type to be allocated as "Analog Data 1" can be selected from a max-
imum of 6 types of data using various types of calculations, which are "Raw
Value", "Peak Value", "Bottom Value", "Top Value", "Valley Value", and "Rate
of Change". These values can be selected alone or in combination with the
Status Flags.
1. Turn ON the power to the CompoNet Slave Unit.
2. Double-click the icon of the Slave Unit to set in the Network Configuration
3. Select the tab of the channel to select the analog data you want and select
4. Return to the General Tab Page, click the Transfer [PC to Unit] Button to
5. Click the OK Button and exit the window.
Select allocation data using one of the following methods and perform remote
I/O communications.
1. Only allocate analog value (default I/O data)
2. Select I/O data (pattern) for allocation (fixed I/O data combination)
Hold Flags (1 output
word (2 bytes))
Window to open the Configuration Window. (Alternatively, right-click the
icon and select Parameters - Edit from the pop-up menu.)
the type of allocation data from the "Analog Data 1 Allocation" pull-down
list.
download the data, and then click the Reset Button to reset the Unit.
I/O data
This is used in conjunction with each type of hold function
(peak, bottom, top, valley) and is used to control execution
timing of the hold function on the Master Unit side.
Details
Section 6-2