CRT1-ID16SL Omron, CRT1-ID16SL Datasheet - Page 63

• Manufacturer Part Number: CRT1-ID16SL
• Description: 16 In NPN Cage Clamp
• Manufacturer: Omron

Specifications of CRT1-ID16SL

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Using Different Cable
Types
Restrictions in Distance between Cables of Multiple CompoNet Systems
Communications Cable
Wiring method for communica-
tions power supply
Master Unit location
Item
Note
Note
Wired separately
from the Communi-
cations Cable.
End of trunk line
The same type of cable must be used for all lines downstream from the Mas-
ter Unit (i.e., the trunk line and branch lines, sub-trunk lines and their branch
lines, and branch lines and sub-branch lines must use the same type of
cable).
When Repeater Units are used, however, different cables can be used for the
trunk line and sub-trunk lines, and for sub-trunk lines and sub-trunk lines,
above and below a Repeater Unit.
Round cable I, round cable II, Flat Cable I (Standard) and Flat Cable II
(Sheathed) are treated as different types of cable.
When using more than one CompoNet System with Flat Cable I or II, opera-
tion may be unstable due to interference. To prevent this, the Flat Cables for
the different CompoNet Systems must be separated from each other by at
least 5 mm.
Round cable I
(1) Bit Slave that come with a flat cable already connected cannot be con-
(2) If a baud rate of 4 Mbps is used, branching and multidrop connections are
nected if the preconnected cable is removed.
not possible from the trunk line. (There are no Multidrop Connectors for
Flat Cable II.)
Cable (trunk line)
Master
Unit
Slave Unit
Repeater Unit
Supplied via Communications Cable. (Power is supplied from the
Master Unit and Repeater Units.)
Baud rate other than 93.75 kbps: End of trunk line
93.75 kbps: Anywhere in network
Cable (sub-trunk line)
Round cable II
Different types of cable can be used.
Cable type
Slave Unit
Flat Cable I
The same type of cable must be used.
The same type of cable must be used.
Flat Cable II
Section 2-3
39