CPMC-88-2 MCM, CPMC-88-2 Datasheet - Page 219

• Manufacturer Part Number: CPMC-88-2
• Description: RF/Coaxial Connector
• Manufacturer: MCM

Specifications of CPMC-88-2

• Connector Type: BNC Coaxial

MCX Crimp Type Right Angle Plugs
for Flexible Cable - 75 Ohm
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
1. Identify connector parts (3-piece parts).
2. Strip cable to dimensions shown. Do not nick braid
3. Flair braid and slide cable into body making certain
4. Solder center conductor to contact through rear
5. Place expansion cap in access port and seat with
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
or center conductor. A wire stripper of correct size
is recommended for this step. Twist stranded center
conductor into tight bundle and tin (optional). Slide
crimp sleeve onto cable as shown.
that the cable dielectric bottoms on center contact.
Arrange braid uniformly around crimp stem. Slide
crimp sleeve over braid and crimp securely using
recommended crimp tool.
access port. Use a minimum amount of solder for
a full fillet joint. .020 (0.51) diameter solder is
recommended.
.156 (3.96) diameter flat punch or MCX hand
assembly tool 141-0000-908. Shrink heat shrink
tubing over crimp sleeve if applicable.
BELDEN 735A
CABLE TYPE
RG-179 DS
RG-179
133-8433-101
133-8434-101
133-8445-101
PART NO.
CRIMP HEX
.128 (3.25)
.151 (3.83)
.151 (3.83)
219