CPMC-88-2 MCM, CPMC-88-2 Datasheet - Page 254
CPMC-88-2
Manufacturer Part Number
CPMC-88-2
Description
RF/Coaxial Connector
Manufacturer
MCM
Datasheet
1.133-3711-801.pdf
(294 pages)
Specifications of CPMC-88-2
Connector Type
BNC Coaxial
- Current page: 254 of 294
- Download datasheet (10Mb)
254
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
N Straight Crimp Type Plugs for Flexible Cable
PART NO.
CPN-68-13
CPN-68-1
CPN-68-8
Connectivity Solutions
RG-8, 213
CABLE
RG-142
RG-58
.335 (8.50)
.335 (8.50)
.354 (9.00)
“A”
Tel: 800-247-8256
STRIP DIMENSIONS
.079 (2.00)
.079 (2.00)
.138 (3.50)
“B”
.157 (4.00)
.157 (4.00)
.157 (4.00)
•
“C”
Fax: 507-833-6287
SLEEVE HEX CRIMP HEX
.429 (10.90)
.215 (5.46)
.215 (5.46)
CRIMP
•
www.EmersonNetworkPower.com/connectivity
CONTACT
.065 (1.65)
.065 (1.65)
.100 (2.54)
1. Identify connector parts. (3 piece parts–except
2. Strip cable to dimensions shown. Do not nick
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over con-
bulkheads)
braid or center conductor. Tin center conductor
if contact will be solder attached. Do not tin cen-
ter conductor if contact is to be crimp attached.
A wire stripper of correct size is recommended
for this step. Slide heat shrink (as applicable) and
crimp sleeve onto jacket of cable.
Solder Attachment: Solder contact to center
conductor through hole using a minimum amount
of solder for a good joint.
Crimp Attachment (where applicable): Crimp
contact to center conductor using recommended
crimp hex.
tact and under braid. Then seat body assembly
firmly onto contact. The cable may have to be
held in a clamping fixture. Arrange braid uniformly
around crimp stem. Slide crimp sleeve forward
and crimp using recommended crimp hex. Slide
heat shrink forward and shrink (as applicable).
RECOMMENDED
CRIMP TOOL
24-8858P
24-8858P
24-313
Related parts for CPMC-88-2
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
IN WALL SPEAKER VOLUME CONTROL70V DECORA WHITE 35W
Manufacturer:
MCM
Part Number:
Description:
HD-15 To DB-9 Female Adaptor, Contact Plating: Gold, Features: D Gender Changers For IBM Type Computers Or Monitors, Completely Shielded
Manufacturer:
MCM
Part Number:
Description:
DC PANEL MOUNT JACK EIAJ 3.3X5.5X1.0 PLASTIC (EIAJ IV)
Manufacturer:
MCM
Part Number:
Description:
IC MCU 8051 OTP 64K 5V 64VQFP
Manufacturer:
Atmel
Datasheet:
Part Number:
Description:
Transistor Reference Software, Compiled So The User Can Substitute Transistors That Perform The Same, Despite Their Different Part Numbers. Crosses Are Made According To Maximum Ratings And Electrical Characteristics, Approximately
Manufacturer:
MCM
Part Number:
Description:
Microwave Oven Triac, PB Package Series, Triac Thyristor
Manufacturer:
MCM
Part Number:
Description:
NTE Thermal Circuit Breakers, Current Rating: 5 A, Resistance: .03 Ohm, Mounting Type: Snap-in, Contact Termination: .25 Quick Connect Terminal, Features: Fuse Holder Type, Visual Trip Indicator, Push To Reset, UL And CSA Listed
Manufacturer:
MCM