9-142 Cinch Connectors, 9-142 Datasheet - Page 156

• Manufacturer Part Number: 9-142
• Description: BARRIER BLOCK 9POS .563"
• Manufacturer: Cinch Connectors
• Series: 142r
• Type: Wire to Boardr

Specifications of 9-142

• Terminal Block Type: Barrier Block
• Number Of Circuits: 9
• Number Of Positions: 18
• Pitch: 0.563" (14.30mm)
• Number Of Rows: 2
• Current: 30A
• Voltage: 250V
• Wire Gauge: 10 AWG
• Mounting Type: Chassis Mount or Panel Mount
• Top Termination: Screws
• Bottom Termination: Closed
• Barrier Type: 2 Wall (Dual)
• Features: Flange
• Color: Black
• Operating Temperature: -55°F ~ 300°F
• Material - Insulation: Phenol Formaldehyde (Phenolic)
• Material Flammability Rating: UL94 V-1
• Product: Barrier Terminal Blocks
• Number Of Positions / Contacts: 9
• Current Rating: 30 A
• Voltage Rating: 250 V
• Wire Gauge Max (awg): 10
• Current, Rating: 30 A (Max.)
• Length: 6.031 in.
• Material, Block: Phenolic
• Material, Screw: Steel
• Mounting Style: Bottom Mounting
• Plating, Screw: Nickel over Copper Flash
• Screw Size: 8-32 x 5⁄16
• Temperature Range: -55 to +300 °F
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 9-142-P; 9142-P; CBB309

D-subminiature Contacts
Coaxial - High Power - High Voltage
Termination Tooling
•
•
NOTE: In order to determine which contact to use with a cable wire not specifically listed:
•
•
•
Call Toll Free: 1 [phone]
Available in Coaxial (50Ω Ω and 75Ω Ω ), High-Voltage, and High-Power styles.
Cable termination and PCB mount contacts are available in right-angle and straight plugs
and receptacles.
Precision screw machine construction results in uniform contact impedance and excellent
contact retention.
Available with 30µin. or 50µin. gold contact plating.
Cable braid can be soldered or crimped.
See pages 4-55 thru 4-61 for Cinch combination layout D-subminiature connectors.
No tools are required for coaxial contact insertion. Contacts snap into connector. Coaxial and high-voltage contact
extraction tool #CET-C6B for removing contacts after termination. See page 4-103.
Tool to crimp sleeve over cable braid: Use 3-cavity die #CCD-26 with crimp frame #FCT-552. See page 4-103.
Check the style of contact required: straight or right-angle, solder braid or crimp braid, etc.
Refer to the cable wire manufacturer’s specifications to determine:
- The O.D. of the insulator.
- The O.D. of the jacket.
Compare the above with the corresponding dimensions C and E in the straight contacts and dimensions B and
C in the right-angle contacts.
4-62