DS3105DK Maxim Integrated Products, DS3105DK Datasheet - Page 7

• Manufacturer Part Number: DS3105DK
• Description: Power Management Modules & Development Tools Demo Kit for DS3105 Demo Kit for DS3105
• Manufacturer: Maxim Integrated Products

Specifications of DS3105DK

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.
At this time the DS3105 demo kit software only runs on Windows 2000 or Windows XP operating systems.
To install the demo kit software, run SETUP.EXE from the disk included in the DS3105DK box or from the zip file
downloadable on our website at www.maxim-ic.com/DS3105DK.
After software installation is complete, set up the hardware as described above and run the software by double-
clicking the DS3105 Demo Kit icon on the Windows desktop or by selecting Start→Programs→Maxim→DS3105
Demo Kit. When the main window appears, select the correct serial port in the box in the upper-left corner. When
communication has been properly established between the software and the hardware, the ID field in the upper-left
corner should indicate 3105 rev x, where x = 0 for a revision A1 device, and x = 1 for a revision A2 device.
The demo kit software always starts in demo mode (with the DEMO MODE checkbox in the upper-left corner
checked) to allow a user to look at the software without having the DK hardware connected to the PC. To connect
the software with the demo kit hardware, uncheck the DEMO MODE box. The software optionally initializes the
DS3105 device and then reads the state of the device to get ready for use.
3.1
The demo kit software has these command line options:
To add command line options to the DS3105 demo kit shortcut that the installer adds to the desktop, right-click on
the shortcut and select Properties. In the Shortcut tab, at the end of the text in the Target text box, add a space
followed by the command line option.
Rev: 012808
_________________________________________________________________________________________DS3105DK
-l <filepath>
-p[port#]
Installing and Running the Software
Command Line Options
specifies an alternate log file
sets the serial (COM) port number
example: “DS3105DK.exe –l mylog.mfg
example: “DS3105DK.exe –p2” sets COM2
7 of 34