LPC2378-STK-MICTOR Olimex Ltd., LPC2378-STK-MICTOR Datasheet - Page 11

• Manufacturer Part Number: LPC2378-STK-MICTOR
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC2378
• Manufacturer: Olimex Ltd.

Specifications of LPC2378-STK-MICTOR

• Processor To Be Evaluated: LPC2378
• Data Bus Width: 16 bit, 32 bit
• Interface Type: RS-232, Ethernet, CAN, I2C, JTAG, SPI, UART
• Dimensions: 5.3 in x 3.99 in
• Operating Supply Voltage: 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

INPUT/OUTPUT:
SD/MMC LED (red) with name SD connected to SD/MMC pin 4.
Power-on LED (red) with name PWR – this LED shows that +3.3V is applied to the
board.
USB_CONNECTED LED (red) with name USBC – connected to LPC2378 pin 48
(P0.14/U2CONNECT/SSEL1).
USB-UP LED (red) with name USB_LINK – connected to LPC2378 pin 32
(P0.13/U2UP_LED/MOSI1/AD0.7).
User button with name BUT1 connected to LPC2378 pin 42 (P0.29/U1D+).
User button with name BUT2 connected to LPC2378 pin 86
(P0.18/DCD1/MOSI0/MOSI).
Reset button with name RESET connected to LPC2378 pin 24 (#RESET).
Trimpot with name AN_TRIM connected to LPC2378 pin 28 (P1.31/SCK1/AD0.5).
TFT display - 128x128 12 bit color with backlight.
Joystick button with name J1 this is 4 directions plus center button, in the schematic the
joystick four directions switches are connected through 33k resistors to LPC2378 pins -
51 (P1.22/MAT1.0) – RIGHT, 61 (P1.27/CAP0.1) – LEFT, 47 (P1.19/CAP1.1) – DOWN,
46 (P1.18/U1UP_LED/PWM1.1/CAP1.0) – UP, the center button is connected to pin 56
(P1.25/MAT1.1).
Page 11