HT1MO2S3E3M-T NXP Semiconductors, HT1MO2S3E3M-T Datasheet - Page 15

• Manufacturer Part Number: HT1MO2S3E3M-T
• Description: RFID Modules & Development Tools HITAG 1 MOA2 MODULE
• Manufacturer: NXP Semiconductors

Specifications of HT1MO2S3E3M-T

• Operating Current: 30 mA
• Operating Voltage: 3.1 V to 4.2 V
• Product: RFID Transponders
• Wireless Frequency: 125 KHz
• Dimensions: 7.55 mm x 11.75 mm x 0.45 mm
• Operating Temperature Range: - 25 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: HT1MOA2S30/E/3,118

Configuration Byte 0:
Configuration Byte 0 / Bit 7:
Bit 7 = ‘1’: Logdata can be read and written to.
Bit 7 = ‘0’: Logdata cannot be accessed.
This bit can be set or reset until Bit 4 of Configuraion Byte 1 is set to ‘0’.
For further information on Logdata and Keys see chapter “Definition of Keys and Logdata“.
Configuration Byte 0 / Bit 6:
Bit 6 = ‘1’: Keys can only be written to.
Bit 6 = ‘0’: Keys cannot be accessed.
This bit can be set or reset until Bit 4 of Configuration Byte 1 is set to ‘0’.
For further information on Logdata and Keys see chapter “Definition of Keys and Logdata“.
Configuration Byte 0 / Bits 0 ... 5:
If one of these Configuration Bits is ‘1’, the corresponding block of the transponder can be read
and written.
If the bit is set to ‘0’, the corresponding block can only be read.
Within one block the configuration is always identical, that means either all 4 pages are read/write
or all of them are read only.
These bits can be set or reset until Bit 4 of Configuration Byte 1 is set to ‘0’.
Ht1moa3.doc/HS
Specifications of the HT1 MOA3 S30
7 6
5 4
3 2
1 0
Page 15 of 24
Rev. 1.1
Block 7: "1" ... r/w
Block 6: "1" ... r/w
Block 5: "1" ... r/w
Block 4: "1" ... r/w
Block 3: "1" ... r/w
Block 2: "1" ... r/w
Key A and Key B:
Logdata A and B:
"0" ... ro
"0" ... ro
"0" ... ro
"0" ... ro
"0" ... ro
"0" ... ro
"1" ... wo
"0" ... 0
"1" ... r/w
"0" ... 0
1997-08-19