8808A/SU 120V Fluke Electronics, 8808A/SU 120V Datasheet - Page 49

• Manufacturer Part Number: 8808A/SU 120V
• Description: USB CABLE KIT SW DMM 5.5 RES
• Manufacturer: Fluke Electronics
• Type: Digital (DMM)r

Specifications of 8808A/SU 120V

• Includes: Test Leads
• Style: Bench
• Display Digits: 5.5
• Display Type: VFD, Dual
• Display Count: 200000
• Function: Voltage, Current, Resistance, Frequency
• Functions, Extra: Continuity, dB, Diode Test
• Features: Hold, Min/Max, RS-232 Port
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Not applicable / RoHS non-compliant
• Other names: 614-1069

Diode / Continuity Testing
Press G to toggle between the continuity and diode test functions for the primary
display. (These functions cannot be selected for the secondary display.)
To perform a continuity test:
To perform a diode or transistor junction test:
1. If required, press G to select the continuity test function.
2. Connect the test leads between the Meter and the circuit under test as shown in
1. If required, press G to select the diode test function.
2. Connect the test leads between the Meter and the diode or transistor junction as
Figure 3-10.
The beeper emits a continuous tone if the input is below 20 e.
shown in Figure 3-11.
The forward voltage of the semiconductor junction (or junctions) is measured.
Readings are displayed in the 2 V range at the fast measurement rate. The Meter
displays 0L if the input is above +2 V.
Figure 3-10. Continuity Test
Operating the Meter from the Front Panel
Selecting a Measurement Function
2W/4W
1000V
750V
mA
LO
HI
200 mA
MAX
MAX
V
INPUT
1000 V
600 V
500 V pk
10 A
MAX
1V
CAT I
CAT II
SENSE
4 W
300V
10A
LO
HI
eue15.eps
3-15
3