5492GPIB B&K Precision, 5492GPIB Datasheet - Page 52
![no-image](/images/manufacturer_photos/0/0/90/b_k_precision_sml.jpg)
5492GPIB
Manufacturer Part Number
5492GPIB
Description
DMM BENCH 5 1/2DGT WITH GPIB CRD
Manufacturer
B&K Precision
Type
Digital (DMM)r
Specifications of 5492GPIB
Includes
Test Leads
Style
Bench
Display Digits
5.5
Display Type
VFD, Dual
Display Count
120000
Function
Voltage, Current, Resistance, Frequency
Functions, Extra
Continuity, dB, Diode Test
Features
Hold, Min/Max, RS-232 Port
Ranging
Auto/Manual
Response
True RMS
Accuracy
+/- 0.012 %
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
6-4-2 Command Syntax
!
!
!
!
!
After the meter executes a query command the return of the result will be in the
following format:
<RESULT> + <CR> <LF> + <PROMPT> + <CR><LF>
Prompts
Query Commands
The purpose of Query commands is used for requesting the meter to respond
its current status. An example of a query command < R1 > is used for requesting
the meter to respond its primary display characters.
Please refer to Section 6-5-3 for detail information about Query Commands.
Echo
With echo ON, the meter echoes (returns) all the characters whatever it
receives.
Terminator
A terminator is a character sent by a host, which identifies the end of a
command string. In RS-232 applications, a valid terminator consists of
two-byte data:
<CR> (Carriage Return) and <LF> (Line Feed)
Prompts
When a host sends a command string to the meter through RS-232 interface,
the meter executes the command and returns one of the prompts as shown on
Table 6-2.
Return result
@ >
? >
S >
= >
# >
! >
>
Table 6-2. RS-232 Return Prompts
The meter is reset to power-up initialisation status.
A command is executed and no errors are detected.
A command error is detected.
A parameter error is detected.
The local key is pressed.
The set up function is under executing.
No numeric reading is available.
52
Description