5492GPIB B&K Precision, 5492GPIB Datasheet - Page 54
![no-image](/images/manufacturer_photos/0/0/90/b_k_precision_sml.jpg)
5492GPIB
Manufacturer Part Number
5492GPIB
Description
DMM BENCH 5 1/2DGT WITH GPIB CRD
Manufacturer
B&K Precision
Type
Digital (DMM)r
Specifications of 5492GPIB
Includes
Test Leads
Style
Bench
Display Digits
5.5
Display Type
VFD, Dual
Display Count
120000
Function
Voltage, Current, Resistance, Frequency
Functions, Extra
Continuity, dB, Diode Test
Features
Hold, Min/Max, RS-232 Port
Ranging
Auto/Manual
Response
True RMS
Accuracy
+/- 0.012 %
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
6-5-2 Set Commands
!
S1<f><r><x>
S1 command
The S1 command is used to set up the measurement functions, ranges, and reading rates
for the primary display in the meter.
The S1 command is followed by three parameters <f>, <r> , and <x> in order.
All characters for the <f>, <r> , and <x> parameters must be in the upper case.
For detail information of using the S1 command, see Table 6-4 and Table 6-6.
Syntax
In S1 command, <f>, <r>, and <x> parameters are used to set up the
<f> for specifying Measurement functions, <r> for specifying ranges,
<f> is a necessary parameter for specifying the measurement
<r> is an optional parameter for specifying measurement range. <r>
<x> is an optional parameter for specifying a reading rate. It is defined
If <x> parameter is not specified, the meter will remain on its current
Table 6-6 shows all available S1 command parameters and available
Example 1: “S104S”
Example 2: “S142”
Example 3: “S17”
Table 6-4. Descriptions for S1 Command
primary display measurements:
and <x> for specifying reading rate.
functions. <f> parameter is defined by a numeric value from “0” to
“9” and character “A”.
parameter is defined by a numeric value from “0” to “7”. If <r>
parameter is omitted (<x> parameter should be omitted, too.) The
meter will be set at auto-ranging.
by a character “S”, “M”, or “F”, in which “S” is for slow rate, “M”
for medium rate, and “F” for fast rate
reading rate without change.
combinations.
Set primary display of the meter to DCV 120V with manual range
and at slow reading rate.
Set primary display to DCA 120mA with manual range, and the
reading rate will not be affected.
Set primary display to frequency with auto ranging and the reading
rate will not be affected.
(<x> is omitted)
(<f>, <r> and <x> are all specified)
(Both <r> and <x> are omitted)
54
Description