NT631C-ST153-EV3 Omron, NT631C-ST153-EV3 Datasheet - Page 257

• Manufacturer Part Number: NT631C-ST153-EV3
• Description: 10.48-ColrDisplay,TFT,Ivy,Eng
• Manufacturer: Omron

Specifications of NT631C-ST153-EV3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Maintenance of the NT631/NT631C
240
6. Fit new backlights.
7. Engage backlight connectors at the top and the bottom respectively in
8. Fit two touch panel cables at the top. Be sure to lock the connectors as in
9. Close the rear case, and tighten four screws. Make sure that the internal
The backlight for the top is different from that for the bottom.
Fit projections and dents of the backlight with those on the fixture, and shift
the backlight to the left. Check that the backlight is in contact with the left
end of the fixture and the cable comes out from the notch without being
trapped.
When the backlight is correctly fit, tighten the screws at a torque of
0.1 N·m.
place. The backlight cable has a polarity; refer to the figure below.
step 4 after fitting.
cable is not trapped.
Bottom part
Top part
Cable
Cable
White
Fixture
Fixture
Red
Backlight
Backlight
Backlight fixture on the PT
White
Red
Backlight fixture on the PT
Backlight
Backlight
Mounting screw
Mounting screw
Section 7-3