NT631C-ST153-EV3 Omron, NT631C-ST153-EV3 Datasheet - Page 51

• Manufacturer Part Number: NT631C-ST153-EV3
• Description: 10.48-ColrDisplay,TFT,Ivy,Eng
• Manufacturer: Omron

Specifications of NT631C-ST153-EV3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Installation
3-1-4
34
Grounding
Note
Note
Power Supply
The applicable power supply specifications are as follows.
Parts Used for Connection
For the connection to the power supply terminal block, twisted wires of 2 mm
or greater cross sectional area and M3.5 size crimp terminals must be used.
Tighten the screws on the terminal block to a torque of 0.8 N ⋅ m.
Recommended Terminals
Conformance to Shipbuilding Standard
The NT631/NT631C has a functional ground terminal (
Carry out wiring under the following conditions.
Power supply
Allowable power supply voltage
fluctuation range
Power supply voltage capacity
Japan Solderless Terminal MFG
Fuji Terminal
Nichifu Terminal
• Cover the entire PT with electromagnetic shielding, and ground the elec-
• Use gaskets or other materials to completely shield all openings and
• Use copper tape or other electrically conductive tape to shield gaps
• To suppress noise terminal voltage, perform installation under the follow-
tromagnetic shielding to the control panel with copper tape or other elec-
trically conductive tape.
Recommended electromagnetic shielding: E09F100 or E09R13502P
Manufacturer: Seiwa Electric MFG, Co., Ltd.
other gaps in the control panel.
between the cutout and the PT before securing the PT in place.
ing conditions. It is recommended to use the following product for the DC
power supply.
Recommended Power Supply model: S82K-03024
Manufacturer: OMRON
Maker
Item
7 mm max.
Fork type
24 VDC
20.4 to 26.4 VDC (24 VDC –15% to +10%)
NT631-ST211 (B)-EV2:
NT631C-ST141 (B) /ST153 (B)-EV3:
2-YS3A
2-YAS3.5
2Y-3.5
(fork type)
30 W or more (Power supply warm-up time
within 200 ms.)
18 W or more
Type
7 mm max.
2-3.5
V2-S3.5
2-3.5
(round type)
Round type
Type
Value
).
2.0 to 2.63 mm
Applicable Wire
(stranded wire)
Section 3-1
2
2