DS2152LN Maxim Integrated Products, DS2152LN Datasheet - Page 60

• Manufacturer Part Number: DS2152LN
• Description: Network Controller & Processor ICs
• Manufacturer: Maxim Integrated Products

Specifications of DS2152LN

• Product: Framer
• Number Of Transceivers: 1
• Data Rate: 2.048 Mbps
• Supply Voltage (max): 5.25 V
• Supply Voltage (min): 4.75 V
• Supply Current (max): 75 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Package / Case: LQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.1.6 HDLC/BOC Register Description
FDLC: FDL CONTROL REGISTER (Address = 00 Hex)
(MSB)
RBR
SYMBOL
TCRCD
TEOM
TABT
TZSD
RHR
RBR
THR
TFS
RHR
POSITION
FDLC.7
FDLC.6
FDLC.5
FDLC.4
FDLC.3
FDLC.2
FDLC.1
FDLC.0
TFS
NAME AND DESCRIPTION
Receive BOC Reset. A 0 to 1 transition will reset the BOC
circuitry. Must be cleared and set again for a subsequent reset.
Receive HDLC Reset. A 0 to 1 transition will reset the HDLC
controller. Must be cleared and set again for a subsequent reset.
Transmit Flag/Idle Select.
0 = 7Eh
1 = FFh
Transmit HDLC Reset. A 0 to 1 transition will reset both the
HDLC controller and the transmit BOC circuitry. Must be
cleared and set again for a subsequent reset.
Transmit Abort. A 0 to 1 transition will cause the FIFO
contents to be dumped and one FEh abort to be sent followed by
7Eh or FFh flags/idle until a new packet is initiated by writing
new data into the FIFO. Must be cleared and set again for a
subsequent abort to be sent.
Transmit End of Message. Should be set to a 1 just before the
last data byte of a HDLC packet is written into the transmit
FIFO at TFFR. This bit will be cleared by the HDLC controller
when the last byte has been transmitted.
Transmit 0 Stuffer Defeat. Overrides internal enable.
0 = enable the 0 stuffer (normal operation)
1 = disable the 0 stuffer
Transmit CRC Defeat.
0 = enable CRC generation (normal operation)
1 = disable CRC generation
THR
60 of 97
TABT
TEOM
TZSD
TCRCF
(LSB)