SPW35N60C3 Infineon Technologies, SPW35N60C3 Datasheet - Page 11

• Manufacturer Part Number: SPW35N60C3
• Description: MOSFET N-CH 650V 34.6A TO-247
• Manufacturer: Infineon Technologies
• Series: CoolMOS™r

Specifications of SPW35N60C3

• Fet Type: MOSFET N-Channel, Metal Oxide
• Fet Feature: Standard
• Rds On (max) @ Id, Vgs: 100 mOhm @ 21.9A, 10V
• Drain To Source Voltage (vdss): 650V
• Current - Continuous Drain (id) @ 25° C: 34.6A
• Vgs(th) (max) @ Id: 3.9V @ 1.9mA
• Gate Charge (qg) @ Vgs: 200nC @ 10V
• Input Capacitance (ciss) @ Vds: 4500pF @ 25V
• Power - Max: 313W
• Mounting Type: Through Hole
• Package / Case: TO-247-3 (Straight Leads)
• Transistor Polarity: N Channel
• Continuous Drain Current Id: 34.6A
• Drain Source Voltage Vds: 650V
• On Resistance Rds(on): 100mohm
• Rds(on) Test Voltage Vgs: 10V
• Voltage Vgs Max: 20V
• Operating Temperature: RoHS Compliant
• Threshold Voltage Vgs Typ: 3V
• Rohs Compliant: Yes
• Configuration: Single
• Resistance Drain-source Rds (on): 0.1 Ohms
• Drain-source Breakdown Voltage: 650 V
• Gate-source Breakdown Voltage: +/- 20 V
• Continuous Drain Current: 34.6 A
• Power Dissipation: 313 W
• Maximum Operating Temperature: + 150 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 55 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SP000014970; SPW35N60C3; SPW35N60C3IN; SPW35N60C3X; SPW35N60C3XK

SPW35N60C3
Published by
Infineon Technologies AG
81726 München
Germany
© Infineon Technologies AG 2006
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as
warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices, please contact your
nearest Infineon Technologies office in Germany or our Infineon Technologies representatives worldwide
(see address list).
Warnings
Due to technical requirements, components may contain dangerous substances.
For information on the types in question, please contact your nearest Infineon Technologies office.
Infineon Technologies' components may only be used in life-support devices or systems with the
expressed written approval of Infineon Technologies if a failure of such components can reasonably
be expected to cause the failure of that life-support device or system, or to affect the safety or
effectiveness of that device or system. Life support devices or systems are intended to be implanted
in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail,
it is reasonable to assume that the health of the user or other persons may be endangered.
Rev. 2.4
Page 11
2005-09-21