BGA2711 T/R NXP Semiconductors, BGA2711 T/R Datasheet - Page 4

• Manufacturer Part Number: BGA2711 T/R
• Description: RF Amplifier TAPE-7 MMIC-RFS
• Manufacturer: NXP Semiconductors
• Type: General Purpose Wideband Amplifierr

Specifications of BGA2711 T/R

• Operating Frequency: 1 GHz
• Noise Figure: 4.8 dB
• Bandwidth: 3600 MHz
• Operating Supply Voltage: 5 V
• Supply Current: 12.6 mA
• Maximum Power Dissipation: 200 mW
• Maximum Operating Temperature: + 150 C
• Mounting Style: SMD/SMT
• Package / Case: SOT-363
• Number Of Channels: 1 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: BGA2711,115

NXP Semiconductors
APPLICATION INFORMATION
Figure 2 shows a typical application circuit for the
BGA2711 MMIC. The device is internally matched to 50 ,
and therefore does not need any external matching. The
value of the input and output DC blocking capacitors C2,
C3 should be not more than 100 pF for applications above
100 MHz. However, when the device is operated below
100 MHz, the capacitor value should be increased.
The 22 nF supply decoupling capacitor, C1 should be
located as closely as possible to the MMIC.
Separate paths must be used for the ground planes of the
ground pins GND1, GND2, and these paths must be as
short as possible. When using vias, use multiple vias per
pin in order to limit ground path inductance.
Figure 3 shows two cascaded MMICs. This configuration
doubles overall gain while preserving broadband
characteristics. Supply decoupling and grounding
conditions for each MMIC are the same as those for the
circuit of Fig.2.
The excellent wideband characteristics of the MMIC make
it and ideal building block in IF amplifier applications such
as LBNs (see Fig.4).
As a buffer amplifier between an LNA and a mixer in a
receiver circuit, the MMIC offers an easy matching, low
noise solution (see Fig.5).
In Fig.6 the MMIC is used as a driver to the power amplifier
in part of a transmitter circuit. Good linear performance
and matched input and output offer quick design solutions
in such applications.
2001 Oct 19
handbook, halfpage
MMIC wideband amplifier
RF input
V s
Fig.2 Typical application circuit.
C1
C2
RF in
GND1
V s
GND2
RF out
C3
RF output
MGU435
4
handbook, halfpage
handbook, halfpage
handbook, halfpage
handbook, halfpage
antenna
from modulation
input
from RF
or IF circuit
Fig.3 Easy cascading application circuit.
circuit
Fig.6 Application as driver amplifier.
DC-block
100 pF
Fig.5 Application as RF amplifier.
Fig.4 Application as IF amplifier.
oscillator
LNA
oscillator
mixer
mixer
wideband
amplifier
oscillator
DC-block
100 pF
wideband
amplifier
mixer
wideband
amplifier
Product specification
DC-block
BGA2711
100 pF
to IF circuit
or demodulator
to IF circuit
or demodulator
to power
amplifier
MGU438
MGU440
MGU437
MGU439
output