2-1419130-4 TE Connectivity, 2-1419130-4 Datasheet - Page 124

• Manufacturer Part Number: 2-1419130-4
• Description: Electromechanical Relay SPDT 1A 12VDC 960Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Miniature Sealed Relayr

Specifications of 2-1419130-4

• Contact Arrangement: SPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.5 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 1 Form C
• Coil Resistance: 960Ohm
• Contact Current Rating: 1A
• Contact Material: Silver Nickel/Gold Plated
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Sealed
• Product Height (mm): 10mm
• Product Depth (mm): 7.5mm
• Product Length (mm): 12.5mm
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Lead Free Status / Rohs Status: Compliant

414
Features
• High sensitivity – nominal coil power requirement is as low as 212mW.
• Low profile, .591 in. (15mm) tall case uses only .465 in
• Power switching capability – contacts rated 14 amps in 1 Form A (SPST-
• Designed to meet UL, CSA, VDE, SEMKO and SEV requirements.
• Designed to meet VDE 8mm spacing, 4kV dielectric, coil to contacts.
• Designed to meet 3 mm creepage between contacts.
• Conforms to: VDE 0110 – Insulation Group C (250V)
• Immersion cleanable
• Well suited for a broad range of applications e.g. HVAC, appliances,
§ For more details, refer to application note 13C265, “Mounting, Termination and Cleaning of
Sensitive, Low Profile, Hi-Current
Relay Designed to Meet
International Standards
Contact Ratings @ 25 C with relay properly vented.
Remove vent nib after soldering and cleaning.
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: Silver-cadmium oxide.
Expected Mechanical Life: 20 million operations.
Expected Electrical Life:
Contact Ratings (See Figure 1):
VDE Contact Ratings: 8 amps, 250VAC.
UL/CSA Contact Ratings: 10 amps, 240VAC; 8 amps 24VDC;
Figure 1 - DC Switching Load Limit Curve
Dimensions are shown for
reference purposes only.
the printed circuit board, permitting high density circuit design.
NO) or 1 Form C (SPDT) arrangements.
security and industrial control.
PC Board Relays.”
300
200
100
50
40
30
20
10
.1
100,000 operations at 8 amps, 240VAC.
50,000 operations at 14 amps NO / 5 amps NC, 120VAC Res.
30,000 operations at 7.2 FLA, 45 LRA, 120VAC.
10,000 operations at 5 FLA, 30 LRA, 240VAC.
30,000 operations at B300 pilot duty (360VA, 240VAC;
Maximum Switched Voltage: 380VAC.
Maximum Switched Current: 14/5 (N.O./N.C.) amps, AC
Maximum Switched Power: 200W, DC; 2,000VA, AC.
Minimum Required Contact Load: 12V, 100mA.
VDE 435 Part 201 – High current applications
VDE 0804 – Telecommunications equipment
VDE 0631 – Temperature controllers and limiters
VDE 0700 – Household appliances
VDE 0805/5.90 – Office machines
§
, ultrasonically sealed case.
Switching Current (Amps DC)
1/3 HP, 120VAC; 1/2 HP, 240VAC.
1
resistive; 8 amps DC (see Fig. 1)
Dimensions are in inches over
(millimeters) unless otherwise
specified.
470VA, 120VAC).
10
2
(3cm
2
) of area on
100
Catalog 1308242
Issued 3-03
T75
14 Amp, PC Board
Miniature Relay
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Initial Dielectric Strength
Between Open Contacts: 1,000V rms.
Between Contacts and Coil: 4,000V rms, 8mm.
Coil Data
Voltage: 3 to 60VDC.
Maximum Power @ 25 C: 1W.
Nominal Power @ 25 C: 230mW, typ.
Temperature Rise: 85C per Watt.
Duty Cycle: Continuous.
Coil Data
Operate Data @ 25 C
Must Operate Voltage: 72% of nom. voltage or less.
Must Release Voltage: 10% of nom. voltage or more.
Operate Time (Excluding Bounce): 6 ms, typ., at nom. voltage.
Release Time (Excluding Bounce): 2.5 ms, typ., at nom. voltage.
Maximum Switching Rate: 20 operations/second.
Maximum Continuous Operating Voltage: 225% of nom. voltage.
ENVIRONMENTAL DATA
Temperature Range
Storage: -40 C to +130 C.
Operating: -40 C to +70 C.
Mechanical Data
Termination: Printed circuit terminals.
Enclosures: Immersion cleanable, plastic sealed case.
Weight: 0.65 oz. (18.5g) approximately.
Coils
DC
File E29244
File LR45064
File No. 3919
Specifications and availability
subject to change.
series
Nominal
Voltage
12
18
24
36
48
60
3
5
6
9
Resistance
in Ohms
15,265
1,455
2,270
5,460
8,790
DC
10%
118
165
365
650
40
Operate
Voltage
Must
12.8
17.2
25.4
34.5
42.8
2.1
3.6
4.3
6.4
8.5
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Nominal
Current
(mA)
Coil
75.0
42.4
36.4
24.7
18.5
12.4
10.6
6.4
5.5
3.9
P&B