2-1419130-4 TE Connectivity, 2-1419130-4 Datasheet - Page 233

• Manufacturer Part Number: 2-1419130-4
• Description: Electromechanical Relay SPDT 1A 12VDC 960Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Miniature Sealed Relayr

Specifications of 2-1419130-4

• Contact Arrangement: SPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.5 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 1 Form C
• Coil Resistance: 960Ohm
• Contact Current Rating: 1A
• Contact Material: Silver Nickel/Gold Plated
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Sealed
• Product Height (mm): 10mm
• Product Depth (mm): 7.5mm
• Product Length (mm): 12.5mm
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Lead Free Status / Rohs Status: Compliant

Contact Data
Type: Single button contact, forcibly guided.
Arrangements: 4 NO + 2NC, 3 NO + 3 NC or 5 NO + 1 NC.
Material: Silver-tin oxide.
Expected Mechanical Life: 10 million operations.
Ratings:
Minimum Contact Load: >50mW.
Initial Contact Resistance:
Initial Dielectric Strength
Between Open Contacts: 1,000Vrms.
Between Coil and Contacts: 3,000Vrms.
Between Contact Sets: 2,000Vrms.
Creepage/Clearance: Contact-to-coil: 5.5/5.5mm.
Outline Dimensions
Wiring Diagrams (Bottom Views)
• 6-pole SR6 relay mounted to PC board on DIN-rail module.
• AC/DC input.
• Spring connectors.
• Module is 1.81 in (46mm) wide.
• Well suited for emergency shut-off, machine control, elevator and
Dimensions are shown for
reference purposes only.
DC Module, 4 NO + 2 NC
DC Module, 3 NO + 3 NC
Features
escalator control, light barrier control
Current: 8A.
Voltage: 250VAC.
Voltage (breaking): 440VAC.
Power (breaking): 2,000VA.
Between Contact Sets: 3/3mm.
≤ 100 millohms/1A/24VDC;
≤ 20 millohms/10mA/5VDC.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Module width: 1.81 in (46 mm).
Module length: 3.42 in (87 mm).
Mounted height: 2.12 - 2.28 in.
(54 - 58 mm) depending upon
DIN rail.
Module fits mounting rails per DIN
EN 50022 or DIN EN 50035.
AC/DC Module, 4 NO + 2 NC
DC Module, 5 NO + 1 NC
Catalog 1308242
Issued 3-03
SR6 Z
6-pole “Safety Relay” on DIN-rail module.
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent
approvals files of the agencies/laboratories and review them to ensure the
product meets the requirements for a given application.
Operate Data
Switching Rate: 3,600 ops./hr. max. at rated load.
Environmental Data
Temperature Range: Operating: -20°C to +50°C.
Mechanical Data
Termination: Spring clamp connections.
Acceptable Wire Sizes: 14 - 18 AWG..
Weight: 3.17 oz. (90 g) approximately.
Coil Data DC @ 20°C
Nominal DC Voltage: 24VDC.
Nominal AC/DC Voltage: 24, 115VAC/VDC.
Nominal AC Voltage: 230VAC.
Minimum Operating Voltage: 90% of nominal.
Minimum Release Voltage: ≤10% of nominal.
Maximum Operating Voltage: 110% of nominal.
Input Circuit: Bridge rectifier, series resistor.
Ordering Information
Specifications and availability
subject to change.
Distributors are more likely to stock the following items.
None at present.
1. Basic Series:
2. Contact Configuration:
5. Coil Voltage:
SR6Z = 6 pole relay with forcibly guided
A = 3 NO + 3 NC contacts
B = 4 NO + 2 NC contacts
C = 5 NO + 1 NC contacts
024 = 24VDC
615 = 115VAC/VDC
Typical Part Number
contacts on DIN-rail module.
series
524 = 24VAC/VDC
730 = 230VAC
B
AC/DC Module, 3 NO + 3 NC
AC/DC Module, 5 NO + 1 NC
SR6Z
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
A
SCHRACK
024
613