2-1419130-4 TE Connectivity, 2-1419130-4 Datasheet - Page 365

• Manufacturer Part Number: 2-1419130-4
• Description: Electromechanical Relay SPDT 1A 12VDC 960Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Miniature Sealed Relayr

Specifications of 2-1419130-4

• Contact Arrangement: SPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.5 mA
• Mounting: Through Hole
• Relay Construction: Non-Latching
• Coil Voltage Dc: 12V
• Contact Form: 1 Form C
• Coil Resistance: 960Ohm
• Contact Current Rating: 1A
• Contact Material: Silver Nickel/Gold Plated
• Coil Suppression Diode: No
• Push To Test Button: No
• Led Indicator: No
• Seal: Sealed
• Product Height (mm): 10mm
• Product Depth (mm): 7.5mm
• Product Length (mm): 12.5mm
• Mounting Style: Through Hole
• Termination Style: PC Pin
• Lead Free Status / Rohs Status: Compliant

Features
• 40A continuous contact rating @ 85°C.
• 1 Form A and 1 Form C arrangements.
• Plug-in or PC board terminals.
• Optional mounting bracket.
• Various enclosure options.
All parametric, environmental and life tests are performed according to EIA
Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH,
29.5 ± 1.0" Hg.) unless otherwise noted.
Contact Data
Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT).
Material: AgNi 0.15 (consult factory for other contact materials).
Max. Switching Voltage: 75VDC
Max. Load Current (@ 14VDC Load Voltage):
Max. Switching Power: 50-500 watts DC (voltage dependent)
Min. Recommended Current: 1 amp @ 12VDC.
Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts
Expected Life: 10 million operations, mechanical; 100,000 operations at 40
Initial Dielectric Strength
Between Contacts and Coil: 500V rms.
Coil Data
Voltage: 6, 12 and 24VDC.
Resistance: See Coil Data table.
Nom. Power: (@ 23°C coil temp. and rated coil voltage.):
Thermal Resistance: 50°C per actual coil watt in still air with no contact
Coil Data
Conditions
Max. Switching Rate: 20 operations per second with no contact load.
Dimensions are shown for
reference purposes only.
Max. Continuous Current
Max. Make Current
Max. Break Current
Designator
Coil
D
H
F
Load
1.6W, unsuppressed.
1.81W, with 680 ohm resistor.
amps, 14VDC, resistive load on normally open contact.
(2)
(1)
load current.
@ 40 amp contact load.
250 millivolts, maximum, for normally closed
contacts @ 30 amp contact load.
6 operations per minute for rated life at rated load.
Rated Coil
Voltage
(VDC)
12
24
6
Form A
120A
(1)
60A
(NO)
60A
.
±10% (Ohms)
Resistance
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Coil
22.5
360
90
120A
60A
60A
NO
Form C
(1)
Inductance
(H) (Ref.)
.
40A
40A
45A
NC
Coil
0.2
0.8
2.7
Catalog 1308242
Issued 3-03
Must-Operate
Must Operate and Must Release Voltage: See Coil Data table.
Initial Operate Time: 7 milliseconds, typical, with rated coil voltage
Initial Release Time: 2 milliseconds, typical, with zero volts applied (for
Mechanical Data
Termination: 0.250" quick connect and printed circuit terminals.
Enclosures:
Cover Retention: Dust cover will withstand a 33.7 pound (150 Newton)
Weight: 31g (1.1 oz.) approximately (dust cover model).
Abnormal Operation
Overload Current: Consult factory.
24V Jump Start: 24VDC for 5 minutes conducting rated contact current
Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter)
Flammability: UL94V-0 external; UL94-HB or better, internal parts (meets
Operate Data
Environmental Data
Temperature Range: Storage: -40°C to +155°C.
Shock: 20g, 11 milliseconds, half sine wave pulse.
Vibration: (For NC contacts, NO contacts are significantly higher.)
Notes
(1) See Figure 1.
(2) Inrush current for lamp load.
(3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C as
(4) See Figure 2.
(5) Current and times are compatible with circuit protection by a typical
Specifications and availability
subject to change.
VF4
40 Amp Relay
With PC Board or
Quick Connect Terminals
for Automotive Applications
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Dust Cover: Protects relay from dust. For use in passenger
Shrouded Dust Cover: Protects relay and relay connector (order
Weatherproof Cover: Mates with a connector (order separately) to seal
Voltage
(VDC)
stated with no load current flowing through the relay contacts and
minimum coil resistance. Also see Figure 2 for maximum ambient
temperature versus applied coil voltage.
automotive circuit breaker. Relay will make, carry and break the
specified current.
14.4
3.6
7 .2
10-40 Hz., 1.27mm double amplitude.
40-70 Hz., 5 g's constant.
70-100 Hz., 0.5mm double amplitude.
100-500 Hz., 10 g's constant.
drop onto concrete.
series
compartment or enclosures.
FMVSS 302).
@ 23°C.
force (axially applied) without detachment. Ultrasonic
cover: 50 pound (220 Newton).
Must-Release
applied.
unsuppressed relays after having been energized at
rated coil voltage.)
Operating: -40°C to +125°C
Voltage
relay from salt spray etc. Recommended for under
hood application.
(VDC)
separately) from dust and splash.
2.4
0.6
1.2
@ 23°C
20.2
40.5
10.1
TYCO ELECTRONICS
Allowable
(4)
Overdrive
.
(VDC)
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
(3)
@ 85°C
15.7
31.5
7 .9
1017