TXC-06880BIOG Transwitch Corporation, TXC-06880BIOG Datasheet - Page 12
![no-image](/images/manufacturer_photos/0/6/675/transwitch_corporation_sml.jpg)
TXC-06880BIOG
Manufacturer Part Number
TXC-06880BIOG
Description
Manufacturer
Transwitch Corporation
Datasheet
1.TXC-06880BIOG.pdf
(122 pages)
Specifications of TXC-06880BIOG
Operating Supply Voltage (typ)
1.8/3.3V
Operating Temperature Classification
Industrial
Mounting
Surface Mount
Lead Free Status / RoHS Status
Not Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
TXC-06880BIOG
Manufacturer:
SAMWHA
Quantity:
34 000
Envoy-CE2 Device
DATA SHEET
TXC-06880
1 2 o f 12 2
2.1.2 Serial Media Independent Interface (SMII)
2.1.3 Gigabit Media Independent Interface (GMII) & Media Independent Interface (MII)
The Serial Media Independent Interface (SMII) is capable of operating at 10/100 Mbit/s mixed
mode. The SMII is configurable to operate in either Full Duplex or Half Duplex mode.
Control and Data are transported across the Tx and Rx signals in 10 bit segments. The
segments are synchronized using the SYNC signal. From the 10 bits, 2 bits are control and
the other 8 bits are data. In 100 Mbit/s mode, every 10 bit segment transfers a new byte of
data. In 10 Mbit/s mode, each 10 bit segment is repeated ten times. Please refer to the SMII
specification for further details.
Each SMII port is comprised of:
The GMII interface of the Envoy-CE2 is capable of operating at 1 Gbit/s. When configured in
MII mode, the interface is capable of operating at 10/100 Mbit/s. The GMII/MII ports allow the
Envoy-CE2 to connect to Multi-rate Gigabit Ethernet PHY devices.
When configured as GMII, each port is comprised of:
Note: The GMII is a 3.3 V interface that will only work with a 3.3 V PHY device.
When configured as MII, each port is comprised of:
Note: The GMII signal pins are muxed with the SMII signal pins.
The following sequence needs to be performed when switching from GMII mode to MII mode
and vice versa:
• Two serial data signals (Tx and Rx) per port
• 125 MHz reference clock signal (Clock) per Configurable MAC
• Synchronization signal (SYNC) per Configurable MAC
• Two data buses, Transmit and Receive, each 8 bits wide
• Two clock signals, 1 per direction
• Two network status signals (Rx Error and Tx Error)
• Two control signals (Rx Data Valid and Tx Enable)
• All signals are synchronous to the clock
• Note: The GMII is a 3.3 V interface that will only work with a 3.3 V PHY device.
• Two data buses, Transmit and Receive, each 4 bits wide
• Two clock signals, 1 per direction
• Four Status signals (Rx Data Valid, Tx Enable, Carrier sense, and Collision detect)
• Enable Soft Reset for the MAC (Register 0x4000 Bit 31 for Port 0)
• Reprogram Interface Mode Register (Register 0x4004 Bits 8-9)
• Remove Soft Reset
• The transmit clock is an output and the receive clock is an input
• An input pad is provided to source the transmit clock from an external oscillator
• Uses Least Significant Nibble of the GMII bus
• Both the transmit and receive clocks are inputs to the Envoy-CE2
-
Functional Description
-
PRELIMINARY TXC-06880-MB, Ed. 4
February 2005