XR88C681CP/40 Exar Corporation, XR88C681CP/40 Datasheet - Page 14

• Manufacturer Part Number: XR88C681CP/40
• Description: Dual Channel UART
• Manufacturer: Exar Corporation

Specifications of XR88C681CP/40

• Features: *
• Number Of Channels: 2, DUART
• Fifo's: 1 Byte, 3 Byte
• Voltage - Supply: 5V
• With Parallel Port: Yes
• With Cmos: Yes
• Mounting Type: Through Hole
• Package / Case: 40-DIP (0.600", 15.24mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

B.1 DUART Register Addressing
The addressing of the internal registers of the DUART is presented in Table 1. Please note that some of the
registers are “Read Only” and others are “Write Only”. Each channel is provided with the following dedicated
(addressable) registers.
D Command Registers
D Mode Registers (MR1 and MR2)
D Status Registers
D Clock Select Registers
D Receiver Holding Register (RHR) and Transmit Holding Register (THR)
Additionally, the DUART contains the following registers that support/control both channels.
D Interrupt Status Register
D Interrupt Mask Register
D Masked Interrupt Status Register
D Interrupt Vector Register
D Auxiliary Control Register
And finally, the DUART also contains other registers that support functions other than serial data communication, such
as the parallel ports and the counters/timers.
D OPCR- Output Port Control Register
D IPCR - Input Port Configuration Register
D CTUR - Counter/Timer Upper Byte Register
D CTLR - Counter/Timer Lower Byte Register
Rev. 2.11
E clock
-RESET
-R/W
Figure 2. External Logic Circuitry required to interface a 6800 Family
Processor to the XR88C681 Device
14
-WR
-RD
RESET