ISP1507FBS,518 NXP Semiconductors, ISP1507FBS,518 Datasheet - Page 15

• Manufacturer Part Number: ISP1507FBS,518
• Description: RF Transceiver USB 2.0 ULPI TRNSCVR
• Manufacturer: NXP Semiconductors

Specifications of ISP1507FBS,518

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Power Supply Requirement: Single
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Lead Free Status / RoHS Status: Compliant
• Other names: 935285499518 ISP1507FBS-T

NXP Semiconductors
ISP1507E_ISP1507F_1
Product data sheet
7.9.15 NXT
7.9.16 CLOCK
7.9.17 GND (die pad)
ULPI next data output pin. The ISP1507 holds NXT at LOW by default. When DIR is LOW
and the link is sending data to the ISP1507, NXT will be asserted to notify the link to
provide the next data byte. When DIR is at HIGH and the ISP1507 is sending data to the
link, NXT will be asserted to notify the link that another valid byte is on the bus. NXT is not
used for register read data or the RXCMD status update.
For details on NXT usage, refer to UTMI+ Low Pin Interface (ULPI) Specification Rev. 1.1 .
A 60 MHz output interface clock to synchronize the ULPI bus. The ISP1507 provides two
clocking options:
For details on CLOCK usage, refer to UTMI+ Low Pin Interface (ULPI) Specification
Rev. 1.1 .
Global ground signal, except for the charge pump that uses CPGND. The die pad is
exposed on the underside of the package as a ground plate. This acts as a ground to all
circuits in the ISP1507, except the charge pump. To ensure correct operation of the
ISP1507, GND must be soldered to the cleanest ground available.
•
•
A crystal is attached between the XTAL1 and XTAL2 pins.
A clock is driven into the XTAL1 pin, with the XTAL2 pin left floating.
Rev. 01 — 28 May 2008
ISP1507E; ISP1507F
ULPI HS USB OTG transceiver
© NXP B.V. 2008. All rights reserved.
14 of 78