SDINB11024 SanDisk, SDINB11024 Datasheet - Page 2

• Manufacturer Part Number: SDINB11024
• Manufacturer: SanDisk

Specifications of SDINB11024

• Lead Free Status / RoHS Status: Compliant

Revision 3.1
SanDisk
or malfunction of the product may directly threaten life or injury. Per SanDisk Terms and Conditions of Sale, the user of SanDisk
products in life support applications assumes all risk of such use and indemnifies SanDisk against all damages. See “Disclaimer
of Liability.”
This document is for information use only and is subject to change without prior notice. SanDisk Corporation assumes no
responsibility for any errors that may appear in this document, nor for incidental or consequential damages resulting from the
furnishing, performance or use of this material. No part of this document may be reproduced, transmitted, transcribed, stored in
a retrievable manner or translated into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written consent of an officer of SanDisk
Corporation.
All parts of the SanDisk documentation are protected by copyright law and all rights are reserved.
SanDisk and the SanDisk logo are registered trademarks of SanDisk Corporation. CompactFlash is a U.S. registered trademark
of SanDisk Corporation.
Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of
their respective companies.
© 2006 SanDisk Corporation. All rights reserved.
SanDisk products are covered or licensed under one or more of the following U.S. Patent Nos. 5,070,032; 5,095,344; 5,168,465;
5,172,338; 5,198,380; 5,200,959; 5,268,318; 5,268,870; 5,272,669; 5,418,752; 5,602,987. Other U.S. and foreign patents
awarded and pending.
Lit. No. 80-36-00450 Rev. 3.1
Revision History
September 2005
October 2005
October 2005
October 2005
November 2005
January 2006
February 2006
November 2006
December 2006
© 2006 SanDisk Corporation
®
Corporation general policy does not recommend the use of its products in life support applications where in a failure
Revision 0.1—First draft of initial release
Revision 0.2—Second draft of initial release
Revision 0.3—Third draft of initial release
Revision 1.0—Release
Revision 1.1—Minor revision in Section 1.2; changed area in Table 1-1
Revision 2.0—Added 4GB specifications
Revision 2.1—Added footnote for MB/GB calculation in Section 2, 3 & App B
Revision 3.0—Major revision to include high capacity information and other changes to the SDA spec;
updated contact information.
Revision 3.1—Changed G8 pin from “VCORE” to “FCAP”; adjusted capacitor specifications.
12/06
Printed in U.S.A.
i
SanDisk iNAND Product Manual