LH75411 NXP Semiconductors, LH75411 Datasheet - Page 34

• Manufacturer Part Number: LH75411
• Manufacturer: NXP Semiconductors

Specifications of LH75411

• Lead Free Status / RoHS Status: Supplier Unconfirmed

LH75401/LH75411
ELECTRICAL SPECIFICATIONS
NOTE: These ratings are only for transient conditions. Operation at
NOTES:
1. Core Voltage should never exceed I/O Voltage after initial power up. See the section titled ‘Power Supply Sequencing’.
2. Connect VDDA1 to VDDC when using the on-chip linear regulator.
3. On-chip Linear regulator enabled. When the on-chip linear regulator is enabled, Core power is drawn from VDD – allow VDDC pins to float.
4. Will operate to DC with PLL disabled. Core frequencies greater than 84 MHz require external clock and VDDC. Core frequencies faster than
5. Processor is functional at minimum frequency, but not all peripherals may be enabled.
6. The maximum operating frequency is the crystal frequency × 3.5.
NOTES:
1. On-chip Linear regulator and PLL disabled; VDDC supplied externally.
2. Core speeds greater than 84 MHz require external VDDC and may not yield proper UART baud rates.
3. Core speeds greater than 70 MHz require an external clock.
4. Additional performance may be achieved in accordance with Figure 5.
34
DC Core Supply Voltage (VDDC)
DC I/O Supply Voltage (VDD)
DC Analog Supply Voltage for ADC (VDDA0)
DC Analog Supply Voltage for PLL (VDDA1)
Storage Temperature (TSTG)
DC Core Supply Voltage (VDDC) (Linear Regulator disabled)
DC Analog Supply Voltage for ADC (VDDA0)
DC I/O Supply Voltage (VDD)
DC Analog Supply Voltage for PLL (VDDA1)
Clock Frequency (ƒHCLK)
Clock Period (tHCLK)
Crystal Frequency
Industrial Operating Temperature
25°C
70°C
85°C
70 MHz require an externally-supplied clock.
Table 18. Clock Frequency vs. Voltages (VDDC) vs. Temperature
or beyond absolute maximum rating conditions may affect
reliability and cause permanent damage to the device.
Clock Frequency (ƒHCLK)
Clock Period (tHCLK)
Clock Frequency (ƒHCLK)
Clock Period (tHCLK)
Clock Frequency (ƒHCLK)
Clock Period (tHCLK)
PARAMETER
Table 16. Absolute Maximum Ratings
PARAMETER
PARAMETER
Table 17. Recommended Operating Conditions
11.9047 ns
10.952 ns
11.627 ns
91.3 MHz
86 MHz
84 MHz
1.7 V
Rev. 02 — 19 March 2009
NXP Semiconductors
MINIMUM MAXIMUM
-0.3 V
-0.3 V
-0.3 V
-0.3 V
-55°C
10.309 ns
10.869 ns
11.111 ns
97 MHz
92 MHz
90 MHz
1.8 V
125°C
4.6 V
2.4 V
4.6 V
2.4 V
4.375 MHz
11.9047 ns
MINIMUM
103.7 MHz
14 MHz
10.266 ns
10.504 ns
97.4 MHz
95.2 MHz
−40°C
9.643 ns
1.7 V
3.0 V
3.0 V
1.7 V
1.9 V
1.8 V
3.3 V
3.3 V
1.8 V
25°C
TYP.
228.571 ns
MAXIMUM
84 MHz
20 MHz
1.98 V
1.98 V
3.6 V
3.6 V
85°C
Product data sheet
System-on-Chip
NOTES
3, 4, 5
3, 4, 5
4, 5
1
1
2