AT94K10AL-25DQC Atmel, AT94K10AL-25DQC Datasheet - Page 103

• Manufacturer Part Number: AT94K10AL-25DQC
• Manufacturer: Atmel

Specifications of AT94K10AL-25DQC

• Device System Gates: 10000
• Propagation Delay Time: 12.7ns
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Mounting: Surface Mount
• Pin Count: 208
• Package Type: PQFP
• Lead Free Status / RoHS Status: Not Compliant

1138I–FPSLI–1/08
Table 4-17.
Notes:
• Bit 3 - FOC1A: Force Output Compare1A
Writing a logic 1 to this bit forces a change in the compare match output pin PE6 according to
the values already set in COM1A1 and COM1A0. If the COM1A1 and COM1A0 bits are written
in the same cycle as FOC1A, the new settings will not take effect until next compare match or
forced compare match occurs. The Force Output Compare bit can be used to change the output
pin without waiting for a compare match in the timer. The automatic action programmed in
COM1A1 and COM1A0 happens as if a Compare Match had occurred, but no interrupt is gener-
ated and it will not clear the timer even if CTC1 in TCCR1B is set. The FOC1A bit will always be
read as zero. The setting of the FOC1A bit has no effect in PWM mode.
• Bit 2 - FOC1B: Force Output Compare1B
Writing a logic 1 to this bit forces a change in the compare match output pin PE5 according to
the values already set in COM1B1 and COM1B0. If the COM1B1 and COM1B0 bits are written
in the same cycle as FOC1B, the new settings will not take effect until next compare match or
forced compare match occurs. The Force Output Compare bit can be used to change the output
pin without waiting for a compare match in the timer. The automatic action programmed in
COM1B1 and COM1B0 happens as if a Compare Match had occurred, but no interrupt is gener-
ated. The FOC1B bit will always be read as zero. The setting of the FOC1B bit has no effect in
PWM mode.
• Bits 1..0 - PWM11, PWM10: Pulse Width Modulator Select Bits
These bits select PWM operation of Timer/Counter1 as specified in
described on
Table 4-18.
COM1X1
PWM11
0
0
1
1
0
0
1
1
1. In PWM mode, these bits have a different function. Refer to
2. X = A or B
(2)
description.
page
Compare 1 Mode Select
PWM Mode Select
COM1X0
PWM10
107.
0
1
0
1
0
1
0
1
(2)
Description
Timer/Counter1 disconnected from output pin OC1X
Toggles the OC1X output line
Clears the OC1X output line (to zero)
Sets the OC1X output line (to one)
Description
PWM operation of Timer/Counter1 is disabled
Timer/Counter1 is an 8-bit PWM
Timer/Counter1 is a 9-bit PWM
Timer/Counter1 is a 10-bit PWM
(1)
AT94KAL Series FPSLIC
Table 4-21
Table
for a detailed
4-18. This mode is
103