AT94K10AL-25DQC Atmel, AT94K10AL-25DQC Datasheet - Page 57

• Manufacturer Part Number: AT94K10AL-25DQC
• Manufacturer: Atmel

Specifications of AT94K10AL-25DQC

• Device System Gates: 10000
• Propagation Delay Time: 12.7ns
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Operating Temperature Classification: Commercial
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Mounting: Surface Mount
• Pin Count: 208
• Package Type: PQFP
• Lead Free Status / RoHS Status: Not Compliant

4.14.1
1138I–FPSLI–1/08
General AVR/FPGA I/O Select Procedure
I/O select depends on the FISCR register setup and the FISUA..D register written to or read
from.
The following FISCR setups and writing data to the FISUA..D registers will result in the shown
I/O select lines and data presented on the 8-bit AVR–FPGA data bus.
Table 4-5.
Note:
FIADR(b7)
;---------------------------------------------
io_select0_write:
;---------------------------------------------
io_select13_read:
0
0
0
0
ldi r16,0x00
out FISCR,r16
out FISUA,r17;
ret
ldi r16,0x01
out FISCR,r16
in r18,FISUD
ret
1. IOSEL 15..8 are not available on AT94K05.
b6-2
FISCR Register Setups and I/O Select Lines.
FISCR Register
-
-
-
-
XFIS1(b1)
0
0
1
1
;FIADR=0,XFIS1=0,XFIS0=0 ->I/O select line=0
;load I/O select values into FISCR register
;select line 0 high. Place data on AVR<->FPGA bus
; from r17 register. (out going data is assumed
; to be present in r17 before calling this subroutine)
;FIADR=0,XFIS1=0,XFIS0=1 ->I/O select line=13
;load I/O select values into FISCR register
;select line 13 high. Read data on AVR<->FPGA bus
;which was placed into register FISUD.
XFIS0(b0)
0
1
0
1
IOSEL 0
IOSEL 1
IOSEL 2
IOSEL 3
FISUA
AT94KAL Series FPSLIC
IOSEL 4
IOSEL 5
IOSEL 6
IOSEL 7
FISUB
I/O Select Lines
IOSEL 10
IOSEL 11
IOSEL 8
IOSEL 9
FISUC
(1)
IOSEL 12
IOSEL 13
IOSEL 14
IOSEL 15
FISUD
57