PAXI0000 Red Lion Controls, PAXI0000 Datasheet - Page 21

• Manufacturer Part Number: PAXI0000
• Description: 1/8 DIN DIGITAL INPUT PANEL METE
• Manufacturer: Red Lion Controls
• Series: PAXr
• Type: Multimeterr

Specifications of PAXI0000

• Display Style: Red Characters, Black Background
• Display Type: LED
• Display Face Size: 3.80" L x 1.95" W (96.5 x 49.5mm)
• Display Digits: 6
• Display Digits - Height: 0.560" (14.22mm)
• Mounting Type: Panel Mount
• Termination: Terminal Block
• Voltage - Supply: 85 ~ 250VAC
• No. Of Digits / Alpha: 6
• Signal Input Type: Pulse
• Character Size: 0.56"
• Ip/nema Rating: IP65 / NEMA 4X
• Panel Cutout Height: 1.77"
• Display Font Color: Red
• Panel Cutout Width: 3.62"
• Accuracy: ±0.01% %
• Connection Type: Cage-Clamp
• Cut Out, Panel: 1/8 DIN
• Digit Height: 0.56
• Dimensions: 4.2"L×3.8"W×1.95"H
• Display Digit Height: 0.56 "
• Function: Counter/Rate Indicator
• Indicator Type: Counter/Rate Indicator
• Number Of Digits: 5
• Primary Type: Electronic
• Range, Measurement: ±99999999
• Special Features: Programmable Function Keys
• Temperature, Operating, Range: 0 to 50 °C
• Voltage, Supply: 85 to 250 VAC
• Counter Supply Voltage: 85-250VAC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Backlight: -
• Measuring Range: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: Q4600348

“ ” in the following parameters will reflect the chosen setpoint number.) After
the chosen setpoint is programmed, the display will default to
the next setpoint to be programmed and continue the sequence for each setpoint.
Pressing PAR at
the corresponding setpoint annunciator of an “on” alarm output. Reverse (
displays the corresponding setpoint annunciator of an “off” alarm output.
“on” alarm output.
6.6 MODULE 6 - S
Select a setpoint (alarm output) to open the remaining module menu. (The
disables the display of the setpoint annunciator. Normal (
flashes the display and the corresponding setpoint annunciator of an
LIt-n
OUt-n
SUP-n
SP-n
trC-n
tyP-n
Stb-n
HyS-n
tOFF-n
tON-n
tOUt-n
AUtO-n
rSd-n
rSAS-n
rSAE-n
PARAMETER
be installed into the PAX (see Ordering Information). Depending on the card installed, there will be two or four setpoint outputs
available. This section replaces the bulletin that comes with the setpoint plug-in card. Please discard the separate literature when using
the Plug-in card with the Digital PAX. For maximum input frequency, unused Setpoints should be configured for
Module 6 is the programming for the setpoint (alarms) output parameters. To have setpoint outputs, a setpoint Plug-in card needs to
The setpoint assignment and the setpoint action determine certain setpoint feature availability. The chart below illustrates this.
SETPOINT ANNUNCIATORS*
SETPOINT SELECT
will exit Module 6.
Annunciators
Output Logic
Power Up State
Setpoint Value
Setpoint Tracking
Boundary Type
Standby Operation
Setpoint Hysteresis
Setpoint Off Delay
Setpoint On Delay
Setpoint Time Out
Counter Auto Reset
Reset With Display Reset
Reset When SPn+1 Activates
Reset When SPn+1 Deactivates
DESCRIPTION
SETPOINT PARAMETER AVAILABILITY
ETPOINT
TIMED OUT
PARAMETER MENU
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
) displays
. Select
(A
)
LARM
BOUNDARY
21
RATE
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
deactivated. Reverse (
deactivated.
powered down.
output at power up.
*
Factory Setting can be used without affecting basic start-up.
Normal (
) P
will restore the output to the same state it was at before the meter was
LATCH
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
ARAMETERS
) turns the output “on” when activated and “off” when
SETPOINT POWER UP STATE *
will activate the output at power up.
SETPOINT OUTPUT LOGIC *
TIMED OUT
) turns the output “off” when activated and “on” when
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
COUNTER
BOUNDARY
(
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
action.
)
LATCH
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
will deactivate the