BOXD845EBG2L Intel, BOXD845EBG2L Datasheet - Page 53

• Manufacturer Part Number: BOXD845EBG2L
• Manufacturer: Intel

Specifications of BOXD845EBG2L

• Lead Free Status / Rohs Status: Supplier Unconfirmed

2.8 Connectors
✏
CAUTION
Only the back panel USB, front panel USB, VGA, and PS/2 connectors of the Desktop Boards
D845EBG2 and D845EPT2 have overcurrent protection. The Desktop Boards’ internal
connectors are not overcurrent protected and should connect only to devices inside the computer’s
chassis, such as fans and internal peripherals. Do not use these connectors to power devices
external to the computer’s chassis. A fault in the load presented by the external devices could
cause damage to the computer, the interconnecting cable, and the external devices themselves.
This section describes the Desktop Board’s connectors. The connectors can be divided into these
groups:
•
•
•
NOTE
When installing the Desktop Board in a microATX chassis, make sure that peripheral devices are
installed at least 1.5 inches above the main power connector, the diskette drive connector, the IDE
connector, and the DIMM sockets.
Back panel I/O connectors (see page 54)
 PS/2 keyboard and mouse
 USB (four)
 Parallel port
 Serial port A
 LAN (optional)
 Audio (optional: line out, line in, and mic in)
Internal I/O connectors (see page 57)
 Audio (auxiliary line input and ATAPI CD-ROM)
 Fans
 Power
 Add-in boards (PCI and AGP)
 CNR (optional)
 IDE
 Diskette drive
 SCSI LED
External I/O connectors (see page 70)
 Front panel audio
 Front panel USB
 Serial port B
 Auxiliary front panel power/sleep/message-waiting LED
 Front panel (power/sleep/message-waiting LED, power switch, hard drive activity LED,
reset switch, and auxiliary front panel power LED)
Technical Reference
53