DSPB56371AF150 Freescale Semiconductor, DSPB56371AF150 Datasheet - Page 29

• Manufacturer Part Number: DSPB56371AF150
• Description: IC DSP 24BIT 150MHZ 80-LQFP
• Manufacturer: Freescale Semiconductor
• Series: Symphony™r
• Type: Audio Processorr

Specifications of DSPB56371AF150

• Interface: Host Interface, I²C, SAI, SPI
• Clock Rate: 150MHz
• Non-volatile Memory: ROM (384 kB)
• On-chip Ram: 264kB
• Voltage - I/o: 3.30V
• Voltage - Core: 1.25V
• Operating Temperature: -40°C ~ 115°C
• Mounting Type: Surface Mount
• Package / Case: 80-LQFP
• Product: DSPs
• Data Bus Width: 24 bit
• Processor Series: DSP563xx
• Core: 56000
• Numeric And Arithmetic Format: Fixed-Point
• Device Million Instructions Per Second: 150 MIPs
• Maximum Clock Frequency: 150 MHz
• Program Memory Size: 192 KB
• Data Ram Size: 264 KB
• Operating Supply Voltage: 1.25 V, 3.3 V
• Maximum Operating Temperature: + 115 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.10 SPDIF Transmitter Digital Audio Interface
Freescale Semiconductor
Signal
Name
ADO
PD0
PD1
ACI
disconnected
disconnected
output, or
output, or
Output
Input,
Input,
Type
Input
Table 10. Digital Audio Interface (DAX) Signals
Disconnected
Disconnected
State During
Reset
GPIO
GPIO
DSP56371 Data Sheet, Rev. 4.1
Audio Clock Input—This is the DAX clock input. When
programmed to use an external clock, this input supplies the DAX
clock. The external clock frequency must be 256, 384, or 512
times the audio sampling frequency (256 × Fs, 384 × Fs or 512 ×
Fs, respectively).
Port D0—When the DAX is configured as GPIO, this signal is
individually programmable as input, output, or internally
disconnected.
The default state after reset is GPIO disconnected.
Internal Pull down resistor.
This input is 5 V tolerant.
Digital Audio Data Output—This signal is an audio and
non-audio output in the form of AES/SPDIF, CP340 and IEC958
data in a biphase mark format.
Port D1—When the DAX is configured as GPIO, this signal is
individually programmable as input, output, or internally
disconnected.
The default state after reset is GPIO disconnected.
Internal Pull down resistor.
This input is 5 V tolerant.
Signal Description
Signal/Connection Descriptions
29