EP1C20F400I7 Altera, EP1C20F400I7 Datasheet - Page 45

• Manufacturer Part Number: EP1C20F400I7
• Description: IC CYCLONE FPGA 20K LE 400-FBGA
• Manufacturer: Altera
• Series: Cyclone®r

Specifications of EP1C20F400I7

• Number Of Logic Elements/cells: 20060
• Number Of Labs/clbs: 2006
• Total Ram Bits: 294912
• Number Of I /o: 301
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 400-FBGA
• Family Name: Cyclone®
• Number Of Logic Blocks/elements: 20060
• # I/os (max): 301
• Frequency (max): 320.1MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 20060
• Ram Bits: 294912
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 400
• Package Type: FBGA
• No. Of Logic Blocks: 2006
• No. Of Macrocells: 20060
• Family Type: Cyclone
• No. Of Speed Grades: 7
• No. Of I/o's: 301
• Clock Management: PLL
• I/o Supply Voltage: 4.1V
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant
• Other names: 544-1049

I/O Structure
Altera Corporation
May 2008
IOEs support many features, including:
■
■
■
■
■
■
■
■
■
■
■
■
Cyclone device IOEs contain a bidirectional I/O buffer and three registers
for complete embedded bidirectional single data rate transfer.
Figure 2–27
register, one output register, and one output enable register. You can use
the input registers for fast setup times and output registers for fast
clock-to-output times. Additionally, you can use the output enable (OE)
register for fast clock-to-output enable timing. The Quartus II software
automatically duplicates a single OE register that controls multiple
output or bidirectional pins. IOEs can be used as input, output, or
bidirectional pins.
Differential and single-ended I/O standards
3.3-V, 64- and 32-bit, 66- and 33-MHz PCI compliance
Joint Test Action Group (JTAG) boundary-scan test (BST) support
Output drive strength control
Weak pull-up resistors during configuration
Slew-rate control
Tri-state buffers
Bus-hold circuitry
Programmable pull-up resistors in user mode
Programmable input and output delays
Open-drain outputs
DQ and DQS I/O pins
shows the Cyclone IOE structure. The IOE contains one input
I/O Structure
Preliminary
2–39