101-0412 Rabbit Semiconductor, 101-0412 Datasheet - Page 53

• Manufacturer Part Number: 101-0412
• Description: INTERFACE PROG 12KEY DISP OP6700
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0412

• Module/board Type: Single Board Computer Module
• For Use With/related Products: OP6700
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.3 How to Set IP Addresses in the Sample Programs
With the introduction of Dynamic C 7.30 we have taken steps to make it easier to run
many of our sample programs. You will see a
Dynamic C to select your configuration from a list of default configurations. You will
have three choices when you encounter a sample program with the
1. You can replace the
2. You can leave
3. You can create a
There are some other “standard” configurations for
ent features such as DHCP. Their values are documented at the top of the
TCP_CONFIG.LIB
the Dynamic C TCP/IP User’s Manual.
IP Addresses Before Dynamic C 7.30
Most of the sample programs use macros to define the IP address assigned to the board and
the IP address of the gateway, if there is a gateway. Instead of the
will see a
In order to do a direct connection, the following IP addresses can be used for the Intellicom:
In this case, the gateway and nameserver are not used, and are commented out. The IP
address of the board is defined to be
as
User’s Manual
10.1.1.1
MY_NETMASK
to
to
address of
the values in the section that directly follows the “General Configuration” comment in
the
than 100. Instructions for doing this are at the beginning of the
library in the
10.10.6.1
10.10.6.100
#define MY_IP_ADDRESS "10.10.6.170"
#define MY_NETMASK "255.255.255.0"
#define MY_GATEWAY "10.10.6.1"
#define MY_NAMESERVER "10.10.6.1"
#define MY_IP_ADDRESS "10.1.1.2"
#define MY_NETMASK "255.255.255.0"
// #define MY_GATEWAY "10.10.6.1"
// #define MY_NAMESERVER "10.10.6.1"
TCP_CONFIG.LIB
MY_IP_ADDRESS
10.1.1.2
.
LIB\TCPIP
,
TCPCONFIG
. If you would like to change the default values, for example, to use an IP
MY_GATEWAY
library in the
CUSTOM_CONFIG.LIB
, the netmask to
TCPCONFIG
for the Intellicom board, and
library. You will find this library in the
macro and other macros.
directory.
at the usual default of 1, which will set the IP configurations
, and
LIB\TCPIP
macro with individual
10.1.1.2
MY_NAMESERVER
255.255.255.0
library and use a
TCPCONFIG
directory. More information is available in
. The IP address of you PC can be defined
TCPCONFIG
10.1.1.1
, and the nameserver and gateway
macros in each program.
MY_IP_ADDRESS
macro. This macro tells
TCPCONFIG
TCPCONFIG
that let you select differ-
for your PC, you can edit
LIB\TCPIP
TCP_CONFIG.LIB
TCPCONFIG
value greater
,
macro, you
directory.
macro.
49