101-0412 Rabbit Semiconductor, 101-0412 Datasheet - Page 8

• Manufacturer Part Number: 101-0412
• Description: INTERFACE PROG 12KEY DISP OP6700
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0412

• Module/board Type: Single Board Computer Module
• For Use With/related Products: OP6700
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1.3 CE Compliance
Equipment is generally divided into two classes.
These limits apply over the range of 30–230 MHz. The limits are 7 dB higher for frequencies
above 230 MHz. Although the test range goes to 1 GHz, the emissions from Rabbit-based
systems at frequencies above 300 MHz are generally well below background noise levels.
The OP6700 operator interface has been tested and was found to be in
conformity with the following applicable immunity and emission stan-
dards. The OP6600 operator interface is also CE qualified as it is a sub-
version of the OP6700 operator interface. Boards that are CE-compli-
ant have the CE mark.
Immunity
The Intellicom series of operator interfaces meets the following EN55024/1998 immunity
standards.
• EN61000-4-2 (ESD)
• EN61000-4-3 (Radiated Immunity)
• EN61000-4-4 (EFT)
• EN61000-4-6 (Conducted Immunity)
Additional shielding or filtering may be required for a heavy industrial environment.
Emissions
The Intellicom series of operator interfaces meets the following emission standards emis-
sion standards with the Rabbit 2000 spectrum spreader turned on and set to the normal
mode. The spectrum spreader is only available with Rev. C or higher of the Rabbit 2000
microprocessor. This microprocessor is used on the Intellicom operator interfaces that
carry the CE mark.
• EN55022:1998 Class B
• FCC Part 15 Class B
Your results may vary, depending on your application, so additional shielding or filtering
may be needed to maintain the Class B emission qualification.
4
Digital equipment meant for light industrial use
Less restrictive emissions requirement:
less than 40 dB µV/m at 10 m
(40 dB relative to 1 µV/m) or 300 µV/m
NOTE: Earlier versions of the Intellicom sold before 2003 that do not have the CE mark
are not CE-complaint.
CLASS A
Digital equipment meant for home use
More restrictive emissions requirement:
30 dB µV/m at 10 m or 100 µV/m
CLASS B
Intellicom (OP6600/OP6700)