20-668-0011 Rabbit Semiconductor, 20-668-0011 Datasheet - Page 199

• Manufacturer Part Number: 20-668-0011
• Description: IC MPU RABIT3000A 55.5MHZ128LQFP
• Manufacturer: Rabbit Semiconductor

Specifications of 20-668-0011

• Processor Type: Rabbit 3000 8-Bit
• Speed: 55.5MHz
• Voltage: 2.5V, 2.7V, 3V, 3.3V
• Mounting Type: Surface Mount
• Package / Case: 128-LQFP
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 55.5 MHz
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 55 C
• Number Of Programmable I/os: 56
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 316-1061

22.3 Operation
The following steps explain how to set up a PWM channel.
1. Configure Timer A9 via TAT9R to provide the desired PWM clock frequency.
2. Configure PWLxR to select whether to spread the PWM output throughout the cycle.
3. Configure PWLxR to select whether to suppress the PWM output.
4. Configure the duty cycle by writing to PWLxR and PWMxR.
22.3.1 Handling Interrupts
The following steps explain how an interrupt is set up and used.
1. Write the vector to the interrupt service routine to the internal interrupt table.
2. Configure PWL0R to select the PWM interrupt priority and PWL1R to select PWM
The following actions occur within the interrupt service routine.
• Any PWM values may be updated.
• The interrupt request should be cleared by writing to any PWM register.
22.3.2 Example ISR
A sample interrupt handler is shown below.
Chapter 22 Pulse Width Modulator
interrupt suppression (if an interrupt is desired).
pwm_isr::
push af
ld a, 0x55
ioi ld (PWM0R), a
; note that interrupt request is also cleared by register write above
pop af
ipres
ret
; save used registers
; restore used registers
; update a PWM value
189