MPC866PZP133A Freescale Semiconductor, MPC866PZP133A Datasheet - Page 3

• Manufacturer Part Number: MPC866PZP133A
• Description: IC MPU POWERQUICC 133MHZ 357PBGA
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICCr

Specifications of MPC866PZP133A

• Processor Type: MPC8xx PowerQUICC 32-Bit
• Speed: 133MHz
• Voltage: 1.8V
• Mounting Type: Surface Mount
• Package / Case: 357-PBGA
• Processor Series: MPC8xx
• Core: MPC8xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 133 MHz
• Maximum Operating Temperature: + 95 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Family Name: MPC8xx
• Device Core: PowerQUICC
• Device Core Size: 32b
• Frequency (max): 133MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 1.8V
• Operating Supply Voltage (max): 1.9V
• Operating Supply Voltage (min): 1.7V
• Operating Temp Range: 0C to 95C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 357
• Package Type: BGA
• Core Size: 32 Bit
• Program Memory Size: 24KB
• Cpu Speed: 133MHz
• Digital Ic Case Style: BGA
• No. Of Pins: 357
• Supply Voltage Range: 1.7V To 1.9V
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Freescale Semiconductor
•
•
•
•
•
•
— ATM port-to-port switching capability without the need for RAM-based microcode
— Simultaneous MII (10/100Base-T) and UTOPIA (half-duplex) capability
— Optional statistical cell counters per PHY
— UTOPIA level 2 compliant interface with added FIFO buffering to reduce the total cell transmission
— Parameter RAM for both SPI and I
— Supports full-duplex UTOPIA both master (ATM side) and slave (PHY side) operation using a 'split' bus
— AAL2/VBR functionality is ROM-resident.
Up to 32-bit data bus (dynamic bus sizing for 8, 16, and 32 bits)
Thirty-two address lines
Memory controller (eight banks)
— Contains complete dynamic RAM (DRAM) controller
— Each bank can be a chip select or RAS to support a DRAM bank
— Up to 30 wait states programmable per memory bank
— Glueless interface to page mode/EDO/SDRAM, SRAM, EPROMs, flash EPROMs, and other memory
— DRAM controller programmable to support most size and speed memory interfaces
— Four CAS lines, four WE lines, and one OE line
— Boot chip-select available at reset (options for 8-, 16-, or 32-bit memory)
— Variable block sizes (32 Kbytes–256 Mbytes)
— Selectable write protection
— On-chip bus arbitration logic
General-purpose timers
— Four 16-bit timers cascadable to be two 32-bit timers
— Gate mode can enable/disable counting
— Interrupt can be masked on reference match and event capture
Fast Ethernet controller (FEC)
— Simultaneous MII (10/100Base-T) and UTOPIA operation when using the UTOPIA multiplexed bus
System integration unit (SIU)
— Bus monitor
— Software watchdog
— Periodic interrupt timer (PIT)
— Low-power stop mode
— Clock synthesizer
— Decrementer and time base from the PowerPC architecture
— Reset controller
— IEEE 1149.1 test access port (JTAG)
time. (The earlier UTOPIA level 1 specification is also supported.)
– Multi-PHY support on the MPC866, MPC859P, and MPC859T
– Four PHY support on the MPC866/859
devices.
MPC866/MPC859 Hardware Specifications, Rev. 2
2
C can be relocated without RAM-based microcode
Features
3