UDA1345TS/N2,112 NXP Semiconductors, UDA1345TS/N2,112 Datasheet - Page 3

• Manufacturer Part Number: UDA1345TS/N2,112
• Description: IC AUDIO CODEC 28-SSOP
• Manufacturer: NXP Semiconductors
• Type: Stereo Audior

Specifications of UDA1345TS/N2,112

• Package / Case: 28-SSOP (0.200", 5.30mm Width)
• Data Interface: Serial
• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 2
• Sigma Delta: Yes
• S/n Ratio, Adcs / Dacs (db) Typ: 94 / 98
• Voltage - Supply, Analog: 2.4 V ~ 3.6 V
• Voltage - Supply, Digital: 2.4 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Number Of Adc Inputs: 2
• Number Of Dac Outputs: 2
• Conversion Rate: 100 KSPS
• Interface Type: Serial (I2S) or L3
• Resolution: 24 bit
• Operating Supply Voltage: 2.4 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Number Of Channels: 2 ADC / 2 DAC
• Supply Current: 10 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-1157-5; 935266777112; UDA1345TSDB

NXP Semiconductors
1
1.1
• Low power consumption
• 2.4 to 3.6 V power supply range with 3.0 V typical
• 5 V tolerant TTL compatible digital inputs
• 256, 384 and 512f
• Supports sampling frequencies from 8 to 100 kHz
• Non-inverting ADC plus integrated high-pass filter to
• The ADC supports 2 V (RMS) input signals
• Overload detector for easy record level control
• Separate power control for ADC and DAC
• Integrated digital interpolation filter plus non-inverting
• Functions controllable either by L3 microcontroller
• The UDA1345TS is pin and function compatible with the
• Small package size (SSOP28).
1.2
• I
• Three combined data formats with MSB data output and
• 1f
1.3
The sound processing features of the UDA1345TS can
only be used in L3 microcontroller mode:
• Digital dB-linear volume control (low microcontroller
• Digital de-emphasis for 32, 44.1 and 48 kHz
• Soft mute via cosine roll-off (in 1024 samples).
Note: in contrast to the UDA1344TS, the UDA1345TS
does not have bass-boost and treble.
3
2002 May 28
UDA1345TS
cancel DC offset
DAC
interface or via static pins
UDA1344TS
16, 18 and 20 bits format compatible
LSB 16, 18 and 20 bits data input
load) via L3 microcontroller with 1 dB steps
Economy audio CODEC
2
TYPE NUMBER
S-bus, MSB-justified up to 24 bits and LSB-justified
s
FEATURES
ORDERING INFORMATION
input and output format data rate.
General
Multiple format input interface
DAC digital sound processing
s
system clock
SSOP28
NAME
plastic shrink small outline package; 28 leads; body width 5.3 mm
3
1.4
• Stereo single-ended input configuration
• Stereo line output (under microcontroller volume
• High linearity, dynamic range and low distortion.
2
The UDA1345TS is a single-chip stereo Analog-to-Digital
Converter (ADC) and Digital-to-Analog Converter (DAC)
with signal processing features employing bitstream
conversion techniques. The low power consumption and
low voltage requirements make the device eminently
suitable for use in low-voltage low-power portable digital
audio equipment which incorporates recording and
playback functions.
The UDA1345TS supports the I
word lengths of up to 24 bits, the MSB justified data format
with word lengths of up to 20 bits and the LSB justified
serial data format with word lengths of 16, 18 and 20 bits.
The UDA1345TS also supports three combined data
formats with MSB justified data output and LSB 16, 18
and 20 bits data input.
The UDA1345TS can be used either with static pin control
or under L3 microcontroller interface. In L3 mode the
UDA1345TS has basic sound features in playback mode
such as de-emphasis, volume control and soft mute.
DESCRIPTION
control), no post filter required
PACKAGE
GENERAL DESCRIPTION
Advanced audio configuration
2
S-bus data format with
UDA1345TS
Product specification
SOT341-1
VERSION