ADV611JST Analog Devices Inc, ADV611JST Datasheet - Page 14
![no-image](/images/manufacturer_photos/0/0/57/analog_devices_inc_sml.jpg)
ADV611JST
Manufacturer Part Number
ADV611JST
Description
IC CODEC DIGITAL CCTV 120LQFP
Manufacturer
Analog Devices Inc
Type
Video Codecr
Datasheet
1.ADV611JSTZ.pdf
(46 pages)
Specifications of ADV611JST
Rohs Status
RoHS non-compliant
Data Interface
Serial
Resolution (bits)
8 b
Sigma Delta
No
Voltage - Supply, Digital
4.5 V ~ 5.5 V
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
120-LQFP
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
ADV611JST
Manufacturer:
ad
Quantity:
1 831
Company:
Part Number:
ADV611JST
Manufacturer:
ADI
Quantity:
996
Company:
Part Number:
ADV611JSTZ
Manufacturer:
ADI
Quantity:
526
Company:
Part Number:
ADV611JSTZ
Manufacturer:
Analog Devices Inc
Quantity:
10 000
Part Number:
ADV611JSTZ
Manufacturer:
ADI
Quantity:
20 000
Some comments on how these registers work are as follows:
• The vertical numbers include the blanking areas of the video.
• The default cropping mode is set for the entire frame. Specifi-
When the quality box is enabled (Mode Control register, Bit 14
= 1), the area defined by the HSTART, HEND, VSTART and
VEND registers is the quality box area, and the rest of the video
area is attenuated according to the value in the background
Contrast Control register (Indirect Register Index 0x9). In this
mode, the range of values for VSTART and VEND is 1–243 for
NTSC and 1–288 for PAL. Also note that VSTART and VEND
do not need to be updated for each field in this mode.
ADV611/ADV612
VIDEO AREA REGISTERS
When the quality box is disabled (Mode Control register, Bit 14 = 0), the area defined by the HSTART, HEND, VSTART and
VEND registers is the active area that the wavelet kernel processes. Video data outside the active video area is set to minimum lumi-
nance and zero chrominance (black) by the ADV611/ADV612. These registers allow cropping of the input video during compression
(encode only), but do not change the image size. Figure 12 shows how the video area registers work together.
HSTART Register
Indirect (Write Only) Register Index 0x02
This register holds the setting for the horizontal start of the ADV611/ADV612’s active video area or quality box. The value in this
register is usually set to zero, but in cases where you wish to crop incoming video it is possible to do so by changing HST.
[9:0]
[15:10] Reserved (always write zero)
HEND Register
Indirect (Write Only) Register Index 0x03
This register holds the setting for the horizontal end of the ADV611/ADV612’s active video area or quality box. If the value is larger
than the max size of the selected video mode, the ADV611/ADV612 uses the max size of the selected mode for HEND.
[9:0]
[15:10] Reserved (always write zero)
VSTART Register
Indirect (Write Only) Register Index 0x04
This register holds the setting for the vertical start of the ADV611/ADV612’s active video area or quality box. The value in this
register is usually set to zero unless you want to crop the active video.
To vertically crop video while encoding, program the VSTART and VEND registers with actual video line numbers, which differ for
each field. The VSTART and VEND contents must be updated on each field unless the quality box is enabled. Perform this updating as
part of the field-by-field BW register update process. To perform this dynamic update correctly, the update software must keep track of
which field is being processed next.
[9:0]
[15:10] Reserved (always write zero)
VEND Register
Indirect (Write Only) Register Index 0x05
This register holds the setting for the vertical end of the ADV611/ADV612’s active video area or quality box. If the value is larger
than the max size of the selected video mode, the ADV611/ADV612 uses the max size of the selected mode for VEND.
Specifically, a VSTART value of 21 will include the first line
of active video, and the first pixel in a line corresponds to a
value HSTART of 0 (for NTSC regular).
Note that the vertical coordinates start with 1, whereas the
horizontal coordinates start with 0.
cally, Field 2 starts at a VSTART value of 283 (for NTSC
regular).
Horizontal Start, HST[9:0]. 10-bit value defining the start of the active video region. (0 at reset)
Horizontal End, HEN[9:0]. 10-bit value defining the end of the active video region. (0x3FF at reset this value is larger
than the max size of the largest video mode)
Vertical Start, VST[9:0]. 10-bit value defining the starting line of the active video region, with line numbers from 1-to-625
in PAL and 1-to-525 in NTSC. (0 at reset)
–14–
VSTART
VEND
Figure 12. Video Area and Video Area Registers
0, 0
ZERO
ZERO
ZERO
HSTART
ACTIVE VIDEO AREA
MAX FOR SELECTED VIDEO MODE
ZERO
ZERO
HEND
ZERO
ZERO
ZERO
REV. 0
X, Y