KSZ8893MBL Micrel Inc, KSZ8893MBL Datasheet - Page 38

• Manufacturer Part Number: KSZ8893MBL
• Description: IC MANAGED SW 10/100 100-LFBGA
• Manufacturer: Micrel Inc

Specifications of KSZ8893MBL

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFBGA
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1603 - EVAL KIT EXPERIMENTAL KSZ8893MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3090

Micrel, Inc.
KSZ8893MQL/MBL
Switching Engine
The KSZ8893MQL/MBL features a high-performance switching engine to move data to and from the MACs’
packet buffers. It operates in store and forward mode, while the efficient switching mechanism reduces overall
latency.
The switching engine has a 32kB internal frame buffer. This buffer pool is shared between all three ports. There
are a total of 256 buffers available. Each buffer is sized at 128 bytes.
MAC Operation
The KSZ8893MQL/MBL strictly abides by IEEE 802.3 standards to maximize compatibility.
Inter Packet Gap (IPG)
If a frame is successfully transmitted, the 96 bits time IPG is measured between the two consecutive MTXEN. If
the current packet is experiencing collision, the 96 bits time IPG is measured from MCRS and the next MTXEN.
Back-Off Algorithm
The KSZ8893MQL/MBL implements the IEEE 802.3 standard for the binary exponential back-off algorithm, and
optional "aggressive mode" back-off. After 16 collisions, the packet is optionally dropped depending on the switch
configuration for register 4 (0x04) bit [3].
Late Collision
If a transmit packet experiences collisions after 512 bit times of the transmission, the packet is dropped.
Illegal Frames
The KSZ8893MQL/MBL discards frames less than 64 bytes, and can be programmed to accept frames up to1518
bytes, 1536 bytes or 1916 bytes. These maximum frame size settings are programmed in register 4 (0x04). Since
the KSZ8893MQL/MBL supports VLAN tags, the maximum sizing is adjusted when these tags are present.
Full Duplex Flow Control
The KSZ8893MQL/MBL supports standard IEEE 802.3x flow control frames on both transmit and receive sides.
On the receive side, if the KSZ8893MQL/MBL receives a pause control frame, the KSZ8893MQL/MBL will not
transmit the next normal frame until the timer, specified in the pause control frame, expires. If another pause
frame is received before the current timer expires, the timer will be updated with the new value in the second
pause frame. During this period (while it is flow controlled), only flow control packets from the KSZ8893MQL/MBL
are transmitted.
On the transmit side, the KSZ8893MQL/MBL has intelligent and efficient ways to determine when to invoke flow
control. The flow control is based on availability of the system resources, including available buffers, available
transmit queues and available receive queues.
The KSZ8893MQL/MBL will flow control a port that has just received a packet if the destination port resource is
busy. The KSZ8893MQL/MBL issues a flow control frame (XOFF), containing the maximum pause time defined
by the IEEE 802.3x standard. Once the resource is freed up, the KSZ8893MQL/MBL sends out the other flow
control frame (XON) with zero pause time to turn off the flow control (turn on transmission to the port). A
hysteresis feature is provided to prevent the flow control mechanism from being constantly activated and
deactivated.
The KSZ8893MQL/MBL flow controls all ports if the receive queue becomes full.
Half-Duplex Backpressure
A half-duplex backpressure option (not in IEEE 802.3 standards) is also provided. The activation and deactivation
conditions are the same as full duplex flow control. If backpressure is required, the KSZ8893MQL/MBL sends
preambles to defer the other stations' transmission (carrier sense deference).
To avoid jabber and excessive deference (as defined in the 802.3 standard), after a certain time, the
KSZ8893MQL/MBL discontinues the carrier sense and then raises it again quickly. This short silent time (no
carrier sense) prevents other stations from sending out packets thus keeping other stations in a carrier sense
December 2007
38
M9999-121007-1.5