KSZ8893MBL Micrel Inc, KSZ8893MBL Datasheet - Page 45

• Manufacturer Part Number: KSZ8893MBL
• Description: IC MANAGED SW 10/100 100-LFBGA
• Manufacturer: Micrel Inc

Specifications of KSZ8893MBL

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFBGA
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1603 - EVAL KIT EXPERIMENTAL KSZ8893MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3090

Special Tagging Mode
Special Tagging Mode is designed for spanning tree protocol IGMP snooping and is flexible for use in other
applications. Special Tagging, similar to 802.1Q Tagging, requires software to change network drivers to
insert/modify/strip/interpret the special tag. This mode is enabled by setting both register 11 bit [0] and register 48
bit [2] to ‘1’.
The STPID is only seen and used by the port 3 interface, which should be connected to a processor. Packets
from the processor to the switch’s port 3 should be tagged with the STPID and the port mask, defined as follows:
Packets with normal tags (“0000” port masks) will use KSZ8893MQL/MBL internal MAC table lookup to determine
the forwarding port(s). Also, if packets from the processor are not tagged, the KSZ8893MQL/MBL will treat them
as normal packets and use internal MAC table lookup to determine the forwarding port(s).
The KSZ8893MQL/MBL uses a non-zero “port mask” to bypass the internal MAC table lookup result, and override
any port setting, regardless of port states (disable, blocking, listening, learning). The table below shows the
processor to switch egress rules when dealing with STPID.
December 2007
Ingress Tag Field
(0x810+ port mask)
(0x810+ port mask)
(0x810+ port mask)
(0x810+ port mask)
Not Tagged
“0001”, forward packet to port 1 only
“0010”, forward packet to port 2 only
“0011”, broadcast packet to port 1 and port 2
TPID (tag protocol identifier, 0x8100) + TCI.
Table 11. STPID Egress Rules (Processor to Switch Port 3)
802.1Q Tag Format
TX port “tag
insertion”
0
0
1
1
Don’t care
Table 10. Special Tagging Mode Format
TX port “tag
removal”
0
1
0
1
Don’t care
45
STPID (special tag identifier, 0x810 +
4 bit for “port mask”) + TCI
Special Tag Format
Egress Action to Tag Field
- Modify tag field to 0x8100
- Recalculate CRC
- No change to TCI if not null VID
- Replace VID with ingress (port 3) port
- (STPID + TCI) will be removed
- Padding to 64 bytes if necessary
- Recalculate CRC
- Modify tag field to 0x8100
- Recalculate CRC
- No change to TCI if not null VID
- Replace VID with ingress (port 3) port
- Modify tag field to 0x8100
- Recalculate CRC
- No change to TCI if not null VID
- Replace VID with ingress (port 3) port
- Determined by the Dynamic MAC
VID if null VID
VID if null VID
VID if null VID
Address Table
M9999-121007-1.5